* [gentoo-commits] gentoo-x86 commit in sys-apps/systemd: systemd-9999.ebuild systemd-214.ebuild ChangeLog
@ 2014-06-14 16:33 Mike Gilbert (floppym)
0 siblings, 0 replies; only message in thread
From: Mike Gilbert (floppym) @ 2014-06-14 16:33 UTC (permalink / raw
To: gentoo-commits
floppym 14/06/14 16:33:20
Modified: systemd-9999.ebuild ChangeLog
Added: systemd-214.ebuild
Log:
Version bump.
(Portage version: 2.2.10/cvs/Linux x86_64, signed Manifest commit with key 0BBEEA1FEA4843A4)
Revision Changes Path
1.115 sys-apps/systemd/systemd-9999.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild?rev=1.115&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild?rev=1.115&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild?r1=1.114&r2=1.115
Index: systemd-9999.ebuild
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild,v
retrieving revision 1.114
retrieving revision 1.115
diff -u -r1.114 -r1.115
--- systemd-9999.ebuild 11 Jun 2014 15:13:06 -0000 1.114
+++ systemd-9999.ebuild 14 Jun 2014 16:33:20 -0000 1.115
@@ -1,6 +1,6 @@
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild,v 1.114 2014/06/11 15:13:06 floppym Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild,v 1.115 2014/06/14 16:33:20 floppym Exp $
EAPI=5
@@ -27,7 +27,7 @@
KEYWORDS="~alpha ~amd64 ~arm ~ia64 ~ppc ~ppc64 ~sparc ~x86"
IUSE="acl audit cryptsetup doc +firmware-loader gcrypt gudev http introspection
kdbus +kmod lzma pam policykit python qrcode +seccomp selinux ssl
- test vanilla xattr"
+ test vanilla"
MINKV="3.10"
@@ -50,7 +50,6 @@
qrcode? ( media-gfx/qrencode:0= )
seccomp? ( sys-libs/libseccomp:0= )
selinux? ( sys-libs/libselinux:0= )
- xattr? ( sys-apps/attr:0= )
abi_x86_32? ( !<=app-emulation/emul-linux-x86-baselibs-20130224-r9
!app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)] )"
@@ -117,12 +116,11 @@
pkg_pretend() {
local CONFIG_CHECK="~AUTOFS4_FS ~BLK_DEV_BSG ~CGROUPS ~DEVTMPFS ~DMIID
~EPOLL ~FANOTIFY ~FHANDLE ~INOTIFY_USER ~IPV6 ~NET ~NET_NS ~PROC_FS
- ~SECCOMP ~SIGNALFD ~SYSFS ~TIMERFD
+ ~SECCOMP ~SIGNALFD ~SYSFS ~TIMERFD ~TMPFS_XATTR
~!IDE ~!SYSFS_DEPRECATED ~!SYSFS_DEPRECATED_V2
~!GRKERNSEC_PROC"
use acl && CONFIG_CHECK+=" ~TMPFS_POSIX_ACL"
- use xattr && CONFIG_CHECK+=" ~TMPFS_XATTR"
kernel_is -lt 3 7 && CONFIG_CHECK+=" ~HOTPLUG"
use firmware-loader || CONFIG_CHECK+=" ~!FW_LOADER_USER_HELPER"
@@ -212,7 +210,6 @@
$(use_enable seccomp)
$(use_enable selinux)
$(use_enable test tests)
- $(use_enable xattr)
# not supported (avoid automagic deps in the future)
--disable-chkconfig
@@ -268,7 +265,6 @@
--disable-selinux
--disable-timesyncd
--disable-tests
- --disable-xattr
--disable-xz
--disable-python-devel
)
@@ -432,15 +428,18 @@
}
pkg_postinst() {
+ newusergroup() {
+ enewgroup "$1"
+ enewuser "$1" -1 -1 -1 "$1"
+ }
+
enewgroup systemd-journal
- enewgroup systemd-network
- enewuser systemd-network -1 -1 -1 systemd-network
- enewgroup systemd-timesync
- enewuser systemd-timesync -1 -1 -1 systemd-timesync
- if use http; then
- enewgroup systemd-journal-gateway
- enewuser systemd-journal-gateway -1 -1 -1 systemd-journal-gateway
- fi
+ newusergroup systemd-bus-proxy
+ newusergroup systemd-network
+ newusergroup systemd-resolve
+ newusergroup systemd-timesync
+ use http && newusergroup systemd-journal-gateway
+
systemd_update_catalog
# Keep this here in case the database format changes so it gets updated
1.264 sys-apps/systemd/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/ChangeLog?rev=1.264&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/ChangeLog?rev=1.264&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/ChangeLog?r1=1.263&r2=1.264
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-apps/systemd/ChangeLog,v
retrieving revision 1.263
retrieving revision 1.264
diff -u -r1.263 -r1.264
--- ChangeLog 11 Jun 2014 15:13:06 -0000 1.263
+++ ChangeLog 14 Jun 2014 16:33:20 -0000 1.264
@@ -1,6 +1,12 @@
# ChangeLog for sys-apps/systemd
# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/systemd/ChangeLog,v 1.263 2014/06/11 15:13:06 floppym Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/systemd/ChangeLog,v 1.264 2014/06/14 16:33:20 floppym Exp $
+
+*systemd-214 (14 Jun 2014)
+
+ 14 Jun 2014; Mike Gilbert <floppym@gentoo.org> +systemd-214.ebuild,
+ systemd-9999.ebuild:
+ Version bump.
11 Jun 2014; Mike Gilbert <floppym@gentoo.org> systemd-213.ebuild,
systemd-9999.ebuild:
1.1 sys-apps/systemd/systemd-214.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-214.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-214.ebuild?rev=1.1&content-type=text/plain
Index: systemd-214.ebuild
===================================================================
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-apps/systemd/systemd-214.ebuild,v 1.1 2014/06/14 16:33:20 floppym Exp $
EAPI=5
AUTOTOOLS_PRUNE_LIBTOOL_FILES=all
PYTHON_COMPAT=( python{2_7,3_2,3_3} )
inherit autotools-utils bash-completion-r1 fcaps linux-info multilib \
multilib-minimal pam python-single-r1 systemd toolchain-funcs udev \
user
DESCRIPTION="System and service manager for Linux"
HOMEPAGE="http://www.freedesktop.org/wiki/Software/systemd"
SRC_URI="http://www.freedesktop.org/software/systemd/${P}.tar.xz"
LICENSE="GPL-2 LGPL-2.1 MIT public-domain"
SLOT="0/2"
KEYWORDS="~alpha ~amd64 ~arm ~ia64 ~ppc ~ppc64 ~sparc ~x86"
IUSE="acl audit cryptsetup doc +firmware-loader gcrypt gudev http introspection
kdbus +kmod lzma pam policykit python qrcode +seccomp selinux ssl
test vanilla"
MINKV="3.10"
COMMON_DEPEND=">=sys-apps/util-linux-2.20:0=
sys-libs/libcap:0=
acl? ( sys-apps/acl:0= )
audit? ( >=sys-process/audit-2:0= )
cryptsetup? ( >=sys-fs/cryptsetup-1.6:0= )
gcrypt? ( >=dev-libs/libgcrypt-1.4.5:0= )
gudev? ( dev-libs/glib:2=[${MULTILIB_USEDEP}] )
http? (
>=net-libs/libmicrohttpd-0.9.33:0=
ssl? ( >=net-libs/gnutls-3.1.4:0= )
)
introspection? ( >=dev-libs/gobject-introspection-1.31.1:0= )
kmod? ( >=sys-apps/kmod-15:0= )
lzma? ( app-arch/xz-utils:0=[${MULTILIB_USEDEP}] )
pam? ( virtual/pam:= )
python? ( ${PYTHON_DEPS} )
qrcode? ( media-gfx/qrencode:0= )
seccomp? ( sys-libs/libseccomp:0= )
selinux? ( sys-libs/libselinux:0= )
abi_x86_32? ( !<=app-emulation/emul-linux-x86-baselibs-20130224-r9
!app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)] )"
# baselayout-2.2 has /run
RDEPEND="${COMMON_DEPEND}
>=sys-apps/baselayout-2.2
|| (
>=sys-apps/util-linux-2.22
<sys-apps/sysvinit-2.88-r4
)
!sys-auth/nss-myhostname
!<sys-libs/glibc-2.14
!sys-fs/udev"
# sys-apps/daemon: the daemon only (+ build-time lib dep for tests)
PDEPEND=">=sys-apps/dbus-1.6.8-r1:0
>=sys-apps/hwids-20130717-r1[udev]
>=sys-fs/udev-init-scripts-25
policykit? ( sys-auth/polkit )
!vanilla? ( sys-apps/gentoo-systemd-integration )"
# Newer linux-headers needed by ia64, bug #480218
DEPEND="${COMMON_DEPEND}
app-arch/xz-utils:0
dev-util/gperf
>=dev-util/intltool-0.50
>=sys-devel/binutils-2.23.1
>=sys-devel/gcc-4.6
>=sys-kernel/linux-headers-${MINKV}
ia64? ( >=sys-kernel/linux-headers-3.9 )
virtual/pkgconfig
doc? ( >=dev-util/gtk-doc-1.18 )
python? ( dev-python/lxml[${PYTHON_USEDEP}] )
test? ( >=sys-apps/dbus-1.6.8-r1:0 )"
src_prepare() {
# Bug 463376
sed -i -e 's/GROUP="dialout"/GROUP="uucp"/' rules/*.rules || die
autotools-utils_src_prepare
}
pkg_pretend() {
local CONFIG_CHECK="~AUTOFS4_FS ~BLK_DEV_BSG ~CGROUPS ~DEVTMPFS ~DMIID
~EPOLL ~FANOTIFY ~FHANDLE ~INOTIFY_USER ~IPV6 ~NET ~NET_NS ~PROC_FS
~SECCOMP ~SIGNALFD ~SYSFS ~TIMERFD ~TMPFS_XATTR
~!IDE ~!SYSFS_DEPRECATED ~!SYSFS_DEPRECATED_V2
~!GRKERNSEC_PROC"
use acl && CONFIG_CHECK+=" ~TMPFS_POSIX_ACL"
kernel_is -lt 3 7 && CONFIG_CHECK+=" ~HOTPLUG"
use firmware-loader || CONFIG_CHECK+=" ~!FW_LOADER_USER_HELPER"
if linux_config_exists; then
local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH)
if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then
ewarn "It's recommended to set an empty value to the following kernel config option:"
ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}"
fi
fi
if [[ ${MERGE_TYPE} != binary ]]; then
if [[ $(gcc-major-version) -lt 4
|| ( $(gcc-major-version) -eq 4 && $(gcc-minor-version) -lt 6 ) ]]
then
eerror "systemd requires at least gcc 4.6 to build. Please switch the active"
eerror "gcc version using gcc-config."
die "systemd requires at least gcc 4.6"
fi
fi
if [[ ${MERGE_TYPE} != buildonly ]]; then
if kernel_is -lt ${MINKV//./ }; then
ewarn "Kernel version at least ${MINKV} required"
fi
if ! use firmware-loader && kernel_is -lt 3 8; then
ewarn "You seem to be using kernel older than 3.8. Those kernel versions"
ewarn "require systemd with USE=firmware-loader to support loading"
ewarn "firmware. Missing this flag may cause some hardware not to work."
fi
check_extra_config
fi
}
pkg_setup() {
use python && python-single-r1_pkg_setup
}
src_configure() {
# Keep using the one where the rules were installed.
MY_UDEVDIR=$(get_udevdir)
# Fix systems broken by bug #509454.
[[ ${MY_UDEVDIR} ]] || MY_UDEVDIR=/lib/udev
multilib-minimal_src_configure
}
multilib_src_configure() {
local myeconfargs=(
# disable -flto since it is an optimization flag
# and makes distcc less effective
cc_cv_CFLAGS__flto=no
--disable-maintainer-mode
--localstatedir=/var
--with-pamlibdir=$(getpam_mod_dir)
# avoid bash-completion dep
--with-bashcompletiondir="$(get_bashcompdir)"
# make sure we get /bin:/sbin in $PATH
--enable-split-usr
# disable sysv compatibility
--with-sysvinit-path=
--with-sysvrcnd-path=
# no deps
--enable-efi
--enable-ima
# optional components/dependencies
$(use_enable acl)
$(use_enable audit)
$(use_enable cryptsetup libcryptsetup)
$(use_enable doc gtk-doc)
$(use_enable gcrypt)
$(use_enable gudev)
$(use_enable http microhttpd)
$(usex http $(use_enable ssl gnutls) --disable-gnutls)
$(use_enable introspection)
$(use_enable kdbus)
$(use_enable kmod)
$(use_enable lzma xz)
$(use_enable pam)
$(use_enable policykit polkit)
$(use_with python)
$(use_enable python python-devel)
$(use_enable qrcode qrencode)
$(use_enable seccomp)
$(use_enable selinux)
$(use_enable test tests)
# not supported (avoid automagic deps in the future)
--disable-chkconfig
# hardcode a few paths to spare some deps
QUOTAON=/usr/sbin/quotaon
QUOTACHECK=/usr/sbin/quotacheck
# dbus paths
--with-dbuspolicydir="${EPREFIX}/etc/dbus-1/system.d"
--with-dbussessionservicedir="${EPREFIX}/usr/share/dbus-1/services"
--with-dbussystemservicedir="${EPREFIX}/usr/share/dbus-1/system-services"
--with-dbusinterfacedir="${EPREFIX}/usr/share/dbus-1/interfaces"
--with-ntp-servers="0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org"
)
if use firmware-loader; then
myeconfargs+=(
--with-firmware-path="/lib/firmware/updates:/lib/firmware"
)
fi
# Added for testing; this is UNSUPPORTED by the Gentoo systemd team!
if [[ -n ${ROOTPREFIX+set} ]]; then
myeconfargs+=(
--with-rootprefix="${ROOTPREFIX}"
--with-rootlibdir="${ROOTPREFIX}/$(get_libdir)"
)
fi
if ! multilib_is_native_abi; then
myeconfargs+=(
ac_cv_search_cap_init=
ac_cv_header_sys_capability_h=yes
DBUS_CFLAGS=' '
DBUS_LIBS=' '
--disable-acl
--disable-audit
--disable-gcrypt
--disable-gnutls
--disable-gtk-doc
--disable-introspection
--disable-kmod
--disable-libcryptsetup
--disable-microhttpd
--disable-networkd
--disable-pam
--disable-polkit
--disable-qrencode
--disable-seccomp
--disable-selinux
--disable-timesyncd
--disable-tests
--disable-xz
--disable-python-devel
)
fi
# Work around bug 463846.
tc-export CC
autotools-utils_src_configure
}
multilib_src_compile() {
local mymakeopts=(
udevlibexecdir="${MY_UDEVDIR}"
)
if multilib_is_native_abi; then
emake "${mymakeopts[@]}"
else
# prerequisites for gudev
use gudev && emake src/gudev/gudev{enumtypes,marshal}.{c,h}
echo 'gentoo: $(BUILT_SOURCES)' | \
emake "${mymakeopts[@]}" -f Makefile -f - gentoo
echo 'gentoo: $(lib_LTLIBRARIES) $(pkgconfiglib_DATA)' | \
emake "${mymakeopts[@]}" -f Makefile -f - gentoo
fi
}
multilib_src_test() {
multilib_is_native_abi || continue
default
}
multilib_src_install() {
local mymakeopts=(
# automake fails with parallel libtool relinking
# https://bugs.gentoo.org/show_bug.cgi?id=491398
-j1
udevlibexecdir="${MY_UDEVDIR}"
dist_udevhwdb_DATA=
DESTDIR="${D}"
)
if multilib_is_native_abi; then
emake "${mymakeopts[@]}" install
# Even with --enable-networkd, it's not right to have this running by default
# when it's unconfigured.
rm -f "${D}"/etc/systemd/system/multi-user.target.wants/systemd-networkd.service
else
mymakeopts+=(
install-libLTLIBRARIES
install-pkgconfiglibDATA
install-includeHEADERS
# safe to call unconditionally, 'installs' empty list
install-libgudev_includeHEADERS
install-pkgincludeHEADERS
)
emake "${mymakeopts[@]}"
fi
# install compat pkg-config files
local pcfiles=( src/compat-libs/libsystemd-{daemon,id128,journal,login}.pc )
emake "${mymakeopts[@]}" install-pkgconfiglibDATA \
pkgconfiglib_DATA="${pcfiles[*]}"
}
multilib_src_install_all() {
prune_libtool_files --modules
einstalldocs
# we just keep sysvinit tools, so no need for the mans
rm "${D}"/usr/share/man/man8/{halt,poweroff,reboot,runlevel,shutdown,telinit}.8 \
|| die
rm "${D}"/usr/share/man/man1/init.1 || die
# Disable storing coredumps in journald, bug #433457
mv "${D}"/usr/lib/sysctl.d/50-coredump.conf{,.disabled} || die
# Preserve empty dirs in /etc & /var, bug #437008
keepdir /etc/binfmt.d /etc/modules-load.d /etc/tmpfiles.d \
/etc/systemd/ntp-units.d /etc/systemd/user /var/lib/systemd
# Symlink /etc/sysctl.conf for easy migration.
dosym ../sysctl.conf /etc/sysctl.d/99-sysctl.conf
}
migrate_locale() {
local envd_locale_def="${EROOT%/}/etc/env.d/02locale"
local envd_locale=( "${EROOT%/}"/etc/env.d/??locale )
local locale_conf="${EROOT%/}/etc/locale.conf"
if [[ ! -L ${locale_conf} && ! -e ${locale_conf} ]]; then
# If locale.conf does not exist...
if [[ -e ${envd_locale} ]]; then
# ...either copy env.d/??locale if there's one
ebegin "Moving ${envd_locale} to ${locale_conf}"
mv "${envd_locale}" "${locale_conf}"
eend ${?} || FAIL=1
else
# ...or create a dummy default
ebegin "Creating ${locale_conf}"
cat > "${locale_conf}" <<-EOF
# This file has been created by the sys-apps/systemd ebuild.
# See locale.conf(5) and localectl(1).
# LANG=${LANG}
EOF
eend ${?} || FAIL=1
fi
fi
if [[ ! -L ${envd_locale} ]]; then
# now, if env.d/??locale is not a symlink (to locale.conf)...
if [[ -e ${envd_locale} ]]; then
# ...warn the user that he has duplicate locale settings
ewarn
ewarn "To ensure consistent behavior, you should replace ${envd_locale}"
ewarn "with a symlink to ${locale_conf}. Please migrate your settings"
ewarn "and create the symlink with the following command:"
ewarn "ln -s -n -f ../locale.conf ${envd_locale}"
ewarn
else
# ...or just create the symlink if there's nothing here
ebegin "Creating ${envd_locale_def} -> ../locale.conf symlink"
ln -n -s ../locale.conf "${envd_locale_def}"
eend ${?} || FAIL=1
fi
fi
}
migrate_net_name_slot() {
# If user has disabled 80-net-name-slot.rules using a empty file or a symlink to /dev/null,
# do the same for 80-net-setup-link.rules to keep the old behavior
local net_move=no
local net_name_slot_sym=no
local net_rules_path="${EROOT%/}"/etc/udev/rules.d
local net_name_slot="${net_rules_path}"/80-net-name-slot.rules
local net_setup_link="${net_rules_path}"/80-net-setup-link.rules
if [[ -e ${net_setup_link} ]]; then
net_move=no
elif [[ -f ${net_name_slot} && $(sed -e "/^#/d" -e "/^\W*$/d" ${net_name_slot} | wc -l) == 0 ]]; then
net_move=yes
elif [[ -L ${net_name_slot} && $(readlink ${net_name_slot}) == /dev/null ]]; then
net_move=yes
net_name_slot_sym=yes
fi
if [[ ${net_move} == yes ]]; then
ebegin "Copying ${net_name_slot} to ${net_setup_link}"
if [[ ${net_name_slot_sym} == yes ]]; then
ln -nfs /dev/null "${net_setup_link}"
else
cp "${net_name_slot}" "${net_setup_link}"
fi
eend $? || FAIL=1
fi
}
pkg_postinst() {
newusergroup() {
enewgroup "$1"
enewuser "$1" -1 -1 -1 "$1"
}
enewgroup systemd-journal
newusergroup systemd-bus-proxy
newusergroup systemd-network
newusergroup systemd-resolve
newusergroup systemd-timesync
use http && newusergroup systemd-journal-gateway
systemd_update_catalog
# Keep this here in case the database format changes so it gets updated
# when required. Despite that this file is owned by sys-apps/hwids.
if has_version "sys-apps/hwids[udev]"; then
udevadm hwdb --update --root="${ROOT%/}"
fi
udev_reload || FAIL=1
# Bug 468876
fcaps cap_dac_override,cap_sys_ptrace=ep usr/bin/systemd-detect-virt
# Bug 465468, make sure locales are respect, and ensure consistency
# between OpenRC & systemd
migrate_locale
# Migrate 80-net-name-slot.rules -> 80-net-setup-link.rules
migrate_net_name_slot
if [[ ${FAIL} ]]; then
eerror "One of the postinst commands failed. Please check the postinst output"
eerror "for errors. You may need to clean up your system and/or try installing"
eerror "systemd again."
eerror
fi
if [[ ! -L "${ROOT}"/etc/mtab ]]; then
ewarn "Upstream mandates the /etc/mtab file should be a symlink to /proc/mounts."
ewarn "Not having it is not supported by upstream and will cause tools like 'df'"
ewarn "and 'mount' to not work properly. Please run:"
ewarn " # ln -sf '${ROOT}proc/self/mounts' '${ROOT}etc/mtab'"
ewarn
fi
if ! has_version sys-apps/systemd-ui; then
elog "To get additional features, a number of optional runtime dependencies may"
elog "be installed:"
elog "- sys-apps/systemd-ui: for GTK+ systemadm UI and gnome-ask-password-agent"
fi
}
pkg_prerm() {
# If removing systemd completely, remove the catalog database.
if [[ ! ${REPLACED_BY_VERSION} ]]; then
rm -f -v "${EROOT}"/var/lib/systemd/catalog/database
fi
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-06-14 16:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-14 16:33 [gentoo-commits] gentoo-x86 commit in sys-apps/systemd: systemd-9999.ebuild systemd-214.ebuild ChangeLog Mike Gilbert (floppym)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox