[gentoo-commits] repo/gentoo:master commit in: net-wireless/wpa_supplicant/

["Andreas Sturmlechner" <asturm@gentoo.org>]

commit:     6cc95e2e1d0eb22b52c0453a2f9ed7336e27d83a
Author:     Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Fri Oct  4 11:55:18 2024 +0000
Commit:     Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Fri Oct  4 17:36:55 2024 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6cc95e2e

net-wireless/wpa_supplicant: drop 2.10-r4

Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>

 .../wpa_supplicant/wpa_supplicant-2.10-r4.ebuild   | 477 ---------------------
 1 file changed, 477 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
deleted file mode 100644
index 90ea837e1021..000000000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
+++ /dev/null
@@ -1,477 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha amd64 arm arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now. bug #684442
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:=
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		>=dev-libs/libnl-3.2:3
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-	kernel_linux? (
-		net-wireless/wireless-regdb
-	)
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
-				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			fi
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
-				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-			fi
-		fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (912315)
-	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
-	eapply "${FILESDIR}/${PN}-2.10-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-
-	Kconfig_style_config EAP_PWD
-	if use fils; then
-		Kconfig_style_config FILS
-		Kconfig_style_config FILS_SK_PFS
-	fi
-	if use mesh; then
-		Kconfig_style_config MESH
-	else
-		Kconfig_style_config MESH n
-	fi
-	# WPA3
-	Kconfig_style_config OWE
-	Kconfig_style_config SAE
-	Kconfig_style_config DPP
-	Kconfig_style_config DPP2
-	Kconfig_style_config SUITEB192
-	Kconfig_style_config SUITEB
-
-	if use wep ; then
-		Kconfig_style_config WEP
-	else
-		Kconfig_style_config WEP n
-	fi
-
-	# Watch out, reversed logic
-	if use tkip ; then
-		Kconfig_style_config NO_TKIP n
-	else
-		Kconfig_style_config NO_TKIP
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		else
-			# bug #831369 and bug #684442
-			Kconfig_style_config DRIVER_MACSEC_LINUX n
-			Kconfig_style_config MACSEC n
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	if use kernel_linux ; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-	if ! use wep; then
-		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
-		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
-		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
-		einfo "WEP-enabled networks will not even show up as available."
-		einfo "If your network is missing you may wish to USE=wep"
-	fi
-	if ! use tkip; then
-		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
-		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
-		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
-		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
-		ewarn "as available.  If your network is missing you may wish to USE=tkip"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}