From: "Mike Pagano" <mpagano@gentoo.org>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] proj/linux-patches:5.4 commit in: /
Date: Mon, 9 May 2022 10:55:24 +0000 (UTC) [thread overview]
Message-ID: <1652093707.7aedd27a1f216799c288196924d35eb33df1eb1f.mpagano@gentoo> (raw)
commit: 7aedd27a1f216799c288196924d35eb33df1eb1f
Author: Mike Pagano <mpagano <AT> gentoo <DOT> org>
AuthorDate: Mon May 9 10:55:07 2022 +0000
Commit: Mike Pagano <mpagano <AT> gentoo <DOT> org>
CommitDate: Mon May 9 10:55:07 2022 +0000
URL: https://gitweb.gentoo.org/proj/linux-patches.git/commit/?id=7aedd27a
Linux patch 5.4.192
Signed-off-by: Mike Pagano <mpagano <AT> gentoo.org>
0000_README | 4 +
1191_linux-5.4.192.patch | 2396 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 2400 insertions(+)
diff --git a/0000_README b/0000_README
index bad996a3..cab1fe9c 100644
--- a/0000_README
+++ b/0000_README
@@ -807,6 +807,10 @@ Patch: 1190_linux-5.4.191.patch
From: http://www.kernel.org
Desc: Linux 5.4.191
+Patch: 1191_linux-5.4.192.patch
+From: http://www.kernel.org
+Desc: Linux 5.4.192
+
Patch: 1500_XATTR_USER_PREFIX.patch
From: https://bugs.gentoo.org/show_bug.cgi?id=470644
Desc: Support for namespace user.pax.* on tmpfs.
diff --git a/1191_linux-5.4.192.patch b/1191_linux-5.4.192.patch
new file mode 100644
index 00000000..deeec338
--- /dev/null
+++ b/1191_linux-5.4.192.patch
@@ -0,0 +1,2396 @@
+diff --git a/Makefile b/Makefile
+index 365b487e50d7f..968470cf368ee 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ VERSION = 5
+ PATCHLEVEL = 4
+-SUBLEVEL = 191
++SUBLEVEL = 192
+ EXTRAVERSION =
+ NAME = Kleptomaniac Octopus
+
+diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
+index a1fd3e63e86ec..3db30ce134b95 100644
+--- a/arch/arm/boot/dts/am3517-evm.dts
++++ b/arch/arm/boot/dts/am3517-evm.dts
+@@ -160,6 +160,8 @@
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb1_rst_pins>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+ #phy-cells = <0>;
+@@ -167,7 +169,9 @@
+ };
+
+ &davinci_emac {
+- status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <ðernet_pins>;
++ status = "okay";
+ };
+
+ &davinci_mdio {
+@@ -192,6 +196,8 @@
+ };
+
+ &i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ /* User DIP swithes [1:8] / User LEDS [1:2] */
+ tca6416: gpio@21 {
+@@ -204,6 +210,8 @@
+ };
+
+ &i2c3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ };
+
+@@ -222,6 +230,8 @@
+ };
+
+ &usbhshost {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb1_pins>;
+ port1-mode = "ehci-phy";
+ };
+
+@@ -230,8 +240,35 @@
+ };
+
+ &omap3_pmx_core {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb1_rst_pins>;
++
++ ethernet_pins: pinmux_ethernet_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
++ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
++ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
++ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
++ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
++ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
++ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
++ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
++ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
++ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
++ >;
++ };
++
++ i2c2_pins: pinmux_i2c2_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
++ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
++ >;
++ };
++
++ i2c3_pins: pinmux_i2c3_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
++ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
++ >;
++ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+@@ -299,8 +336,6 @@
+ };
+
+ &omap3_pmx_core2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb1_pins>;
+
+ hsusb1_pins: pinmux_hsusb1_pins {
+ pinctrl-single,pins = <
+diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
+index 8b669e2eafec4..f7b680f6c48ad 100644
+--- a/arch/arm/boot/dts/am3517-som.dtsi
++++ b/arch/arm/boot/dts/am3517-som.dtsi
+@@ -69,6 +69,8 @@
+ };
+
+ &i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ s35390a: s35390a@30 {
+@@ -179,6 +181,13 @@
+
+ &omap3_pmx_core {
+
++ i2c1_pins: pinmux_i2c1_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
++ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
++ >;
++ };
++
+ wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
+diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+index bda22700110cd..287566e09a673 100644
+--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
++++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+@@ -217,6 +217,12 @@
+ wm8731: wm8731@1b {
+ compatible = "wm8731";
+ reg = <0x1b>;
++
++ /* PCK0 at 12MHz */
++ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
++ clock-names = "mclk";
++ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
++ assigned-clock-rates = <12000000>;
+ };
+ };
+
+diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+index 7c4ad541c3f5e..b165bd6ea53b6 100644
+--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+@@ -314,6 +314,8 @@
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sgtl5000>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDIO-supply = <®_module_3v3>;
+@@ -543,8 +545,6 @@
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+- /* SGTL5000 sys_mclk */
+- MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
+@@ -810,6 +810,12 @@
+ >;
+ };
+
++ pinctrl_sgtl5000: sgtl5000grp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
++ >;
++ };
++
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
+index d56728f03c35f..c83323b9ea53c 100644
+--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
++++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
+@@ -37,7 +37,7 @@
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-gpio";
+- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+ regulator-always-on;
+diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+index f7a841a288654..270e4986b6e64 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
++++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+@@ -11,3 +11,18 @@
+ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
+ };
++
++&omap3_pmx_core2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb2_2_pins>;
++ hsusb2_2_pins: pinmux_hsusb2_2_pins {
++ pinctrl-single,pins = <
++ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
++ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
++ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
++ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
++ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
++ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
++ >;
++ };
++};
+diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+index a604d92221a4f..c757f0d7781c1 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
++++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+@@ -11,3 +11,18 @@
+ model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+ };
++
++&omap3_pmx_core2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb2_2_pins>;
++ hsusb2_2_pins: pinmux_hsusb2_2_pins {
++ pinctrl-single,pins = <
++ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
++ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
++ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
++ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
++ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
++ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
++ >;
++ };
++};
+diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
+index b56524cc7fe27..55b619c99e24d 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
++++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
+@@ -265,21 +265,6 @@
+ };
+ };
+
+-&omap3_pmx_core2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb2_2_pins>;
+- hsusb2_2_pins: pinmux_hsusb2_2_pins {
+- pinctrl-single,pins = <
+- OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+- OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+- OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+- OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+- OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+- >;
+- };
+-};
+-
+ &uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
+index 186b2af7743e3..089e9f1f442b5 100644
+--- a/arch/arm/boot/dts/omap3-gta04.dtsi
++++ b/arch/arm/boot/dts/omap3-gta04.dtsi
+@@ -31,6 +31,8 @@
+ aliases {
+ display0 = &lcd;
+ display1 = &tv0;
++ /delete-property/ mmc2;
++ /delete-property/ mmc3;
+ };
+
+ ldo_3v3: fixedregulator {
+diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
+index 5c3845730dbf5..0b80f8bcd3047 100644
+--- a/arch/arm/mach-omap2/omap4-common.c
++++ b/arch/arm/mach-omap2/omap4-common.c
+@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
+ gic_dist_base_addr = of_iomap(np, 0);
++ of_node_put(np);
+ WARN_ON(!gic_dist_base_addr);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
+ twd_base = of_iomap(np, 0);
++ of_node_put(np);
+ WARN_ON(!twd_base);
+
+ skip_errata_init:
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+index d61f43052a344..8e9ad1e51d665 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+@@ -11,26 +11,6 @@
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <761000>;
+@@ -71,26 +51,6 @@
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <731000>;
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+index 046cc332d07f9..f2543da63c39d 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+@@ -11,26 +11,6 @@
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <731000>;
+@@ -71,26 +51,6 @@
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <751000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <771000>;
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+index 8ba3555ca3693..dd62a608c805a 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+@@ -55,26 +55,6 @@
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <666666666>;
+- opp-microvolt = <750000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <770000>;
+diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+index 9ad1d43b8ce75..4fa39654b695d 100644
+--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
++++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+@@ -213,6 +213,10 @@
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+ rohm,reset-snvs-powered;
+
++ #clock-cells = <0>;
++ clocks = <&osc_32k 0>;
++ clock-output-names = "clk-32k-out";
++
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "BUCK1";
+diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
+index 2b7cc5397f80d..91a06cef50c1b 100644
+--- a/arch/x86/include/asm/microcode.h
++++ b/arch/x86/include/asm/microcode.h
+@@ -133,11 +133,13 @@ extern void load_ucode_ap(void);
+ void reload_early_microcode(void);
+ extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
+ extern bool initrd_gone;
++void microcode_bsp_resume(void);
+ #else
+ static inline int __init microcode_init(void) { return 0; };
+ static inline void __init load_ucode_bsp(void) { }
+ static inline void load_ucode_ap(void) { }
+ static inline void reload_early_microcode(void) { }
++static inline void microcode_bsp_resume(void) { }
+ static inline bool
+ get_builtin_firmware(struct cpio_data *cd, const char *name) { return false; }
+ #endif
+diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
+index 4a4198b806b4e..c95a27513a30c 100644
+--- a/arch/x86/kernel/cpu/microcode/core.c
++++ b/arch/x86/kernel/cpu/microcode/core.c
+@@ -772,9 +772,9 @@ static struct subsys_interface mc_cpu_interface = {
+ };
+
+ /**
+- * mc_bp_resume - Update boot CPU microcode during resume.
++ * microcode_bsp_resume - Update boot CPU microcode during resume.
+ */
+-static void mc_bp_resume(void)
++void microcode_bsp_resume(void)
+ {
+ int cpu = smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+@@ -786,7 +786,7 @@ static void mc_bp_resume(void)
+ }
+
+ static struct syscore_ops mc_syscore_ops = {
+- .resume = mc_bp_resume,
++ .resume = microcode_bsp_resume,
+ };
+
+ static int mc_cpu_starting(unsigned int cpu)
+diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
+index 1847e993ac63a..f3f7f4cb15a6b 100644
+--- a/arch/x86/lib/usercopy_64.c
++++ b/arch/x86/lib/usercopy_64.c
+@@ -142,7 +142,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
+
+ /* cache copy and flush to align dest */
+ if (!IS_ALIGNED(dest, 8)) {
+- unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
++ size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
+
+ memcpy((void *) dest, (void *) source, len);
+ clean_cache_range((void *) dest, len);
+diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
+index 1bff0f68f0273..20dd7023132fb 100644
+--- a/arch/x86/power/cpu.c
++++ b/arch/x86/power/cpu.c
+@@ -25,6 +25,7 @@
+ #include <asm/cpu.h>
+ #include <asm/mmu_context.h>
+ #include <asm/cpu_device_id.h>
++#include <asm/microcode.h>
+
+ #ifdef CONFIG_X86_32
+ __visible unsigned long saved_context_ebx;
+@@ -263,6 +264,13 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
+ x86_platform.restore_sched_clock_state();
+ mtrr_bp_restore();
+ perf_restore_debug_store();
++
++ microcode_bsp_resume();
++
++ /*
++ * This needs to happen after the microcode has been updated upon resume
++ * because some of the MSRs are "emulated" in microcode.
++ */
+ msr_restore_context(ctxt);
+ }
+
+diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
+index d5f64018044b0..503404f3280e3 100644
+--- a/drivers/base/arch_topology.c
++++ b/drivers/base/arch_topology.c
+@@ -457,7 +457,7 @@ void update_siblings_masks(unsigned int cpuid)
+ for_each_online_cpu(cpu) {
+ cpu_topo = &cpu_topology[cpu];
+
+- if (cpuid_topo->llc_id == cpu_topo->llc_id) {
++ if (cpu_topo->llc_id != -1 && cpuid_topo->llc_id == cpu_topo->llc_id) {
+ cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling);
+ cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling);
+ }
+diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
+index 9f6782329a237..8a08cbb958d12 100644
+--- a/drivers/block/Kconfig
++++ b/drivers/block/Kconfig
+@@ -39,6 +39,22 @@ config BLK_DEV_FD
+ To compile this driver as a module, choose M here: the
+ module will be called floppy.
+
++config BLK_DEV_FD_RAWCMD
++ bool "Support for raw floppy disk commands (DEPRECATED)"
++ depends on BLK_DEV_FD
++ help
++ If you want to use actual physical floppies and expect to do
++ special low-level hardware accesses to them (access and use
++ non-standard formats, for example), then enable this.
++
++ Note that the code enabled by this option is rarely used and
++ might be unstable or insecure, and distros should not enable it.
++
++ Note: FDRAWCMD is deprecated and will be removed from the kernel
++ in the near future.
++
++ If unsure, say N.
++
+ config AMIGA_FLOPPY
+ tristate "Amiga floppy support"
+ depends on AMIGA
+diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
+index 02af4f109e59f..f24e3791e8400 100644
+--- a/drivers/block/floppy.c
++++ b/drivers/block/floppy.c
+@@ -3012,6 +3012,8 @@ static const char *drive_name(int type, int drive)
+ return "(null)";
+ }
+
++#ifdef CONFIG_BLK_DEV_FD_RAWCMD
++
+ /* raw commands */
+ static void raw_cmd_done(int flag)
+ {
+@@ -3223,6 +3225,35 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
+ return ret;
+ }
+
++static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
++ void __user *param)
++{
++ int ret;
++
++ pr_warn_once("Note: FDRAWCMD is deprecated and will be removed from the kernel in the near future.\n");
++
++ if (type)
++ return -EINVAL;
++ if (lock_fdc(drive))
++ return -EINTR;
++ set_floppy(drive);
++ ret = raw_cmd_ioctl(cmd, param);
++ if (ret == -EINTR)
++ return -EINTR;
++ process_fd_request();
++ return ret;
++}
++
++#else /* CONFIG_BLK_DEV_FD_RAWCMD */
++
++static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
++ void __user *param)
++{
++ return -EOPNOTSUPP;
++}
++
++#endif
++
+ static int invalidate_drive(struct block_device *bdev)
+ {
+ /* invalidate the buffer track to force a reread */
+@@ -3410,7 +3441,6 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
+ {
+ int drive = (long)bdev->bd_disk->private_data;
+ int type = ITYPE(UDRS->fd_device);
+- int i;
+ int ret;
+ int size;
+ union inparam {
+@@ -3561,16 +3591,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
+ outparam = UDRWE;
+ break;
+ case FDRAWCMD:
+- if (type)
+- return -EINVAL;
+- if (lock_fdc(drive))
+- return -EINTR;
+- set_floppy(drive);
+- i = raw_cmd_ioctl(cmd, (void __user *)param);
+- if (i == -EINTR)
+- return -EINTR;
+- process_fd_request();
+- return i;
++ return floppy_raw_cmd_ioctl(type, drive, cmd, (void __user *)param);
+ case FDTWADDLE:
+ if (lock_fdc(drive))
+ return -EINTR;
+diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
+index 1bb00a959c67f..9b1a5e62417cb 100644
+--- a/drivers/bus/sunxi-rsb.c
++++ b/drivers/bus/sunxi-rsb.c
+@@ -224,6 +224,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
+
+ dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
+
++ return rdev;
++
+ err_device_add:
+ put_device(&rdev->dev);
+
+diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c
+index 542b31d6e96dd..636bcf2439ef2 100644
+--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
++++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
+@@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
+ spin_lock_init(&data->lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!r)
++ return -EINVAL;
+ /* one clock/reset pair per word */
+ count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
+ data->membase = devm_ioremap_resource(&pdev->dev, r);
+diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+index 2deed8d8773fa..75e1bf3a08f7c 100644
+--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
++++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+@@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+ return -ENOMEM;
+
+ ret = sun50i_cpufreq_get_efuse(&speed);
+- if (ret)
++ if (ret) {
++ kfree(opp_tables);
+ return ret;
++ }
+
+ snprintf(name, MAX_NAME_LEN, "speed%d", speed);
+
+diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+index 11a4c4029a902..acc2c307c871b 100644
+--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
++++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+@@ -1140,6 +1140,7 @@ static struct clock_source *dcn21_clock_source_create(
+ return &clk_src->base;
+ }
+
++ kfree(clk_src);
+ BREAK_TO_DEBUGGER();
+ return NULL;
+ }
+diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
+index 1f55cd8abb558..5fbda0431d6ab 100644
+--- a/drivers/iio/dac/ad5446.c
++++ b/drivers/iio/dac/ad5446.c
+@@ -170,7 +170,7 @@ static int ad5446_read_raw(struct iio_dev *indio_dev,
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+- *val = st->cached_val;
++ *val = st->cached_val >> chan->scan_type.shift;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = st->vref_mv;
+diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
+index 424922cad1e39..87a51a85a642d 100644
+--- a/drivers/iio/dac/ad5592r-base.c
++++ b/drivers/iio/dac/ad5592r-base.c
+@@ -530,7 +530,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st)
+ if (!ret)
+ st->channel_modes[reg] = tmp;
+
+- fwnode_property_read_u32(child, "adi,off-state", &tmp);
++ ret = fwnode_property_read_u32(child, "adi,off-state", &tmp);
+ if (!ret)
+ st->channel_offstate[reg] = tmp;
+ }
+diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
+index 82af903a765b2..c54eed3f4edce 100644
+--- a/drivers/iio/magnetometer/ak8975.c
++++ b/drivers/iio/magnetometer/ak8975.c
+@@ -391,6 +391,7 @@ static int ak8975_power_on(const struct ak8975_data *data)
+ if (ret) {
+ dev_warn(&data->client->dev,
+ "Failed to enable specified Vid supply\n");
++ regulator_disable(data->vdd);
+ return ret;
+ }
+ /*
+diff --git a/drivers/lightnvm/Kconfig b/drivers/lightnvm/Kconfig
+index 4c2ce210c1237..95b09148167e8 100644
+--- a/drivers/lightnvm/Kconfig
++++ b/drivers/lightnvm/Kconfig
+@@ -5,7 +5,7 @@
+
+ menuconfig NVM
+ bool "Open-Channel SSD target support"
+- depends on BLOCK
++ depends on BLOCK && BROKEN
+ help
+ Say Y here to get to enable Open-channel SSDs.
+
+diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
+index 74595b644b7cd..57fa7807cd7d3 100644
+--- a/drivers/mtd/nand/raw/mtk_ecc.c
++++ b/drivers/mtd/nand/raw/mtk_ecc.c
+@@ -43,6 +43,7 @@
+
+ struct mtk_ecc_caps {
+ u32 err_mask;
++ u32 err_shift;
+ const u8 *ecc_strength;
+ const u32 *ecc_regs;
+ u8 num_ecc_strength;
+@@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = {
+ };
+
+ static const u8 ecc_strength_mt7622[] = {
+- 4, 6, 8, 10, 12, 14, 16
++ 4, 6, 8, 10, 12
+ };
+
+ enum mtk_ecc_regs {
+@@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
+ for (i = 0; i < sectors; i++) {
+ offset = (i >> 2) << 2;
+ err = readl(ecc->regs + ECC_DECENUM0 + offset);
+- err = err >> ((i % 4) * 8);
++ err = err >> ((i % 4) * ecc->caps->err_shift);
+ err &= ecc->caps->err_mask;
+ if (err == ecc->caps->err_mask) {
+ /* uncorrectable errors */
+@@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+ .err_mask = 0x3f,
++ .err_shift = 8,
+ .ecc_strength = ecc_strength_mt2701,
+ .ecc_regs = mt2701_ecc_regs,
+ .num_ecc_strength = 20,
+@@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ .err_mask = 0x7f,
++ .err_shift = 8,
+ .ecc_strength = ecc_strength_mt2712,
+ .ecc_regs = mt2712_ecc_regs,
+ .num_ecc_strength = 23,
+@@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ };
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
+- .err_mask = 0x3f,
++ .err_mask = 0x1f,
++ .err_shift = 5,
+ .ecc_strength = ecc_strength_mt7622,
+ .ecc_regs = mt7622_ecc_regs,
+- .num_ecc_strength = 7,
++ .num_ecc_strength = 5,
+ .ecc_mode_shift = 4,
+ .parity_bits = 13,
+ .pg_irq_sel = 0,
+diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
+index e509c93737c4f..f0e2f2d652829 100644
+--- a/drivers/mtd/nand/raw/sh_flctl.c
++++ b/drivers/mtd/nand/raw/sh_flctl.c
+@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ dma_addr_t dma_addr;
+ dma_cookie_t cookie;
+ uint32_t reg;
+- int ret;
++ int ret = 0;
++ unsigned long time_left;
+
+ if (dir == DMA_FROM_DEVICE) {
+ chan = flctl->chan_fifo0_rx;
+@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ goto out;
+ }
+
+- ret =
++ time_left =
+ wait_for_completion_timeout(&flctl->dma_complete,
+ msecs_to_jiffies(3000));
+
+- if (ret <= 0) {
++ if (time_left == 0) {
+ dmaengine_terminate_all(chan);
+ dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
++ ret = -ETIMEDOUT;
+ }
+
+ out:
+@@ -441,7 +443,7 @@ out:
+
+ dma_unmap_single(chan->device->dev, dma_addr, len, dir);
+
+- /* ret > 0 is success */
++ /* ret == 0 is success */
+ return ret;
+ }
+
+@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_rx && rlen >= 32 &&
+- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
++ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
+ goto convert; /* DMA success */
+
+ /* do polling transfer */
+@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_tx && rlen >= 32 &&
+- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
++ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
+ return; /* DMA success */
+
+ /* do polling transfer */
+diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
+index 60e36f46f8abe..0c191d395f8f3 100644
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1607,9 +1607,6 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
+-
+- /* Configure the RMII clock as output: */
+- miicfg |= GSWIP_MII_CFG_RMII_CLK;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+index cff64e43bdd80..b5f58c62e7d20 100644
+--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
++++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+@@ -14267,10 +14267,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
+
+ /* Stop Tx */
+ bnx2x_tx_disable(bp);
+- /* Delete all NAPI objects */
+- bnx2x_del_all_napi(bp);
+- if (CNIC_LOADED(bp))
+- bnx2x_del_all_napi_cnic(bp);
+ netdev_reset_tc(bp->dev);
+
+ del_timer_sync(&bp->timer);
+@@ -14375,6 +14371,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
+ bnx2x_drain_tx_queues(bp);
+ bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
+ bnx2x_netif_stop(bp, 1);
++ bnx2x_del_all_napi(bp);
++
++ if (CNIC_LOADED(bp))
++ bnx2x_del_all_napi_cnic(bp);
++
+ bnx2x_free_irq(bp);
+
+ /* Report UNLOAD_DONE to MCP */
+diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+index 2affdddc12bf6..e03e2bfcc6a10 100644
+--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+@@ -1547,6 +1547,11 @@ static struct sk_buff *bcmgenet_put_tx_csum(struct net_device *dev,
+ return skb;
+ }
+
++static void bcmgenet_hide_tsb(struct sk_buff *skb)
++{
++ __skb_pull(skb, sizeof(struct status_64));
++}
++
+ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+ struct bcmgenet_priv *priv = netdev_priv(dev);
+@@ -1655,6 +1660,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
+ }
+
+ GENET_CB(skb)->last_cb = tx_cb_ptr;
++
++ bcmgenet_hide_tsb(skb);
+ skb_tx_timestamp(skb);
+
+ /* Decrement total BD count and advance our write pointer */
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+index 23a706a1765a7..410a9bf7bf0ab 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+@@ -64,6 +64,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
+ enum hclge_cmd_status status;
+ struct hclge_desc desc;
+
++ if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
++ dev_err(&hdev->pdev->dev,
++ "msg data length(=%u) exceeds maximum(=%u)\n",
++ msg_len, HCLGE_MBX_MAX_MSG_SIZE);
++ return -EMSGSIZE;
++ }
++
+ resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);
+diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+index b14b164c9601f..5799b434165e0 100644
+--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
++++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+@@ -903,7 +903,8 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+ /* Tx IPsec offload doesn't seem to work on this
+ * device, so block these requests for now.
+ */
+- if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
++ sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
++ if (sam->flags != XFRM_OFFLOAD_INBOUND) {
+ err = -EOPNOTSUPP;
+ goto err_out;
+ }
+diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+index 72e47621d27c7..934c34e98d55f 100644
+--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+@@ -65,8 +65,9 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
+ struct phy_device *phy_dev = ndev->phydev;
+ u32 val;
+
+- writew(SGMII_ADAPTER_DISABLE,
+- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
++ if (sgmii_adapter_base)
++ writew(SGMII_ADAPTER_DISABLE,
++ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+
+ if (splitter_base) {
+ val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
+@@ -88,10 +89,11 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
+ writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
+ }
+
+- writew(SGMII_ADAPTER_ENABLE,
+- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+- if (phy_dev)
++ if (phy_dev && sgmii_adapter_base) {
++ writew(SGMII_ADAPTER_ENABLE,
++ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+ tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
++ }
+ }
+
+ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
+diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
+index 02d6f3ad9aca8..83dc1c2c3b84b 100644
+--- a/drivers/net/hamradio/6pack.c
++++ b/drivers/net/hamradio/6pack.c
+@@ -311,7 +311,6 @@ static void sp_setup(struct net_device *dev)
+ {
+ /* Finish setting up the DEVICE info. */
+ dev->netdev_ops = &sp_netdev_ops;
+- dev->needs_free_netdev = true;
+ dev->mtu = SIXP_MTU;
+ dev->hard_header_len = AX25_MAX_HEADER_LEN;
+ dev->header_ops = &ax25_header_ops;
+@@ -679,9 +678,11 @@ static void sixpack_close(struct tty_struct *tty)
+ del_timer_sync(&sp->tx_t);
+ del_timer_sync(&sp->resync_t);
+
+- /* Free all 6pack frame buffers. */
++ /* Free all 6pack frame buffers after unreg. */
+ kfree(sp->rbuff);
+ kfree(sp->xbuff);
++
++ free_netdev(sp->dev);
+ }
+
+ /* Perform I/O control on an active 6pack channel. */
+diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
+index a4b3fce69ecd9..6016e182f0089 100644
+--- a/drivers/net/hippi/rrunner.c
++++ b/drivers/net/hippi/rrunner.c
+@@ -1346,7 +1346,9 @@ static int rr_close(struct net_device *dev)
+
+ rrpriv->fw_running = 0;
+
++ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ del_timer_sync(&rrpriv->timer);
++ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ writel(0, ®s->TxPi);
+ writel(0, ®s->IpRxPi);
+diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
+index 94a34cf75eb39..39d13f7e4cf33 100644
+--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
++++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
+@@ -628,7 +628,8 @@ idle:
+ cleanup:
+ if (error < 0)
+ phy_mdm6600_device_power_off(ddata);
+-
++ pm_runtime_disable(ddata->dev);
++ pm_runtime_dont_use_autosuspend(ddata->dev);
+ return error;
+ }
+
+diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
+index 4dd7324d91b26..ea46576404b8e 100644
+--- a/drivers/phy/samsung/phy-exynos5250-sata.c
++++ b/drivers/phy/samsung/phy-exynos5250-sata.c
+@@ -190,6 +190,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ return -EINVAL;
+
+ sata_phy->client = of_find_i2c_device_by_node(node);
++ of_node_put(node);
+ if (!sata_phy->client)
+ return -EPROBE_DEFER;
+
+@@ -198,20 +199,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
+ if (IS_ERR(sata_phy->phyclk)) {
+ dev_err(dev, "failed to get clk for PHY\n");
+- return PTR_ERR(sata_phy->phyclk);
++ ret = PTR_ERR(sata_phy->phyclk);
++ goto put_dev;
+ }
+
+ ret = clk_prepare_enable(sata_phy->phyclk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable source clk\n");
+- return ret;
++ goto put_dev;
+ }
+
+ sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
+ if (IS_ERR(sata_phy->phy)) {
+- clk_disable_unprepare(sata_phy->phyclk);
+ dev_err(dev, "failed to create PHY\n");
+- return PTR_ERR(sata_phy->phy);
++ ret = PTR_ERR(sata_phy->phy);
++ goto clk_disable;
+ }
+
+ phy_set_drvdata(sata_phy->phy, sata_phy);
+@@ -219,11 +221,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ phy_provider = devm_of_phy_provider_register(dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+- clk_disable_unprepare(sata_phy->phyclk);
+- return PTR_ERR(phy_provider);
++ ret = PTR_ERR(phy_provider);
++ goto clk_disable;
+ }
+
+ return 0;
++
++clk_disable:
++ clk_disable_unprepare(sata_phy->phyclk);
++put_dev:
++ put_device(&sata_phy->client->dev);
++
++ return ret;
+ }
+
+ static const struct of_device_id exynos_sata_phy_of_match[] = {
+diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
+index 6ef12017ff4e8..96e3426f9293b 100644
+--- a/drivers/phy/ti/phy-am654-serdes.c
++++ b/drivers/phy/ti/phy-am654-serdes.c
+@@ -641,7 +641,7 @@ static int serdes_am654_probe(struct platform_device *pdev)
+
+ clk_err:
+ of_clk_del_provider(node);
+-
++ pm_runtime_disable(dev);
+ return ret;
+ }
+
+diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
+index 3d74629d7423c..471fe2e80f4ea 100644
+--- a/drivers/phy/ti/phy-omap-usb2.c
++++ b/drivers/phy/ti/phy-omap-usb2.c
+@@ -157,7 +157,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
+ return 0;
+
+ err1:
+- clk_disable(phy->wkupclk);
++ clk_disable_unprepare(phy->wkupclk);
+
+ err0:
+ return ret;
+diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
+index 379e9a6a6d894..5f381e4c75779 100644
+--- a/drivers/pinctrl/pinctrl-pistachio.c
++++ b/drivers/pinctrl/pinctrl-pistachio.c
+@@ -1370,10 +1370,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
+ }
+
+ irq = irq_of_parse_and_map(child, 0);
+- if (irq < 0) {
+- dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
++ if (!irq) {
++ dev_err(pctl->dev, "No IRQ for bank %u\n", i);
+ of_node_put(child);
+- ret = irq;
++ ret = -EINVAL;
+ goto err;
+ }
+
+diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
+index f4fe73ce57108..c38f06139ccfa 100644
+--- a/drivers/tty/n_gsm.c
++++ b/drivers/tty/n_gsm.c
+@@ -72,6 +72,8 @@ module_param(debug, int, 0600);
+ */
+ #define MAX_MRU 1500
+ #define MAX_MTU 1500
++/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
++#define PROT_OVERHEAD 7
+ #define GSM_NET_TX_TIMEOUT (HZ*10)
+
+ /**
+@@ -823,7 +825,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
+ break;
+ case 2: /* Unstructed with modem bits.
+ Always one byte as we never send inline break data */
+- *dp++ = gsm_encode_modem(dlci);
++ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
+ break;
+ }
+ WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
+@@ -1300,11 +1302,12 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
+
+ static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
+ {
+- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
++ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
+ if (msg == NULL)
+ return;
+- msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
+- memcpy(msg->data + 1, ctrl->data, ctrl->len);
++ msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */
++ msg->data[1] = (ctrl->len << 1) | EA;
++ memcpy(msg->data + 2, ctrl->data, ctrl->len);
+ gsm_data_queue(gsm->dlci[0], msg);
+ }
+
+@@ -1327,7 +1330,6 @@ static void gsm_control_retransmit(struct timer_list *t)
+ spin_lock_irqsave(&gsm->control_lock, flags);
+ ctrl = gsm->pending_cmd;
+ if (ctrl) {
+- gsm->cretries--;
+ if (gsm->cretries == 0) {
+ gsm->pending_cmd = NULL;
+ ctrl->error = -ETIMEDOUT;
+@@ -1336,6 +1338,7 @@ static void gsm_control_retransmit(struct timer_list *t)
+ wake_up(&gsm->event);
+ return;
+ }
++ gsm->cretries--;
+ gsm_control_transmit(gsm, ctrl);
+ mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
+ }
+@@ -1376,7 +1379,7 @@ retry:
+
+ /* If DLCI0 is in ADM mode skip retries, it won't respond */
+ if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
+- gsm->cretries = 1;
++ gsm->cretries = 0;
+ else
+ gsm->cretries = gsm->n2;
+
+@@ -1810,7 +1813,6 @@ static void gsm_queue(struct gsm_mux *gsm)
+ gsm_response(gsm, address, UA);
+ gsm_dlci_close(dlci);
+ break;
+- case UA:
+ case UA|PF:
+ if (cr == 0 || dlci == NULL)
+ break;
+@@ -1961,7 +1963,8 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
+ }
+ /* Any partial frame was a runt so go back to start */
+ if (gsm->state != GSM_START) {
+- gsm->malformed++;
++ if (gsm->state != GSM_SEARCH)
++ gsm->malformed++;
+ gsm->state = GSM_START;
+ }
+ /* A SOF in GSM_START means we are still reading idling or
+@@ -2098,6 +2101,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
+ gsm_dlci_release(gsm->dlci[i]);
+ mutex_unlock(&gsm->mutex);
+ /* Now wipe the queues */
++ tty_ldisc_flush(gsm->tty);
+ list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
+ kfree(txq);
+ INIT_LIST_HEAD(&gsm->tx_list);
+@@ -2208,7 +2212,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
+ kfree(gsm);
+ return NULL;
+ }
+- gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
++ gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
+ if (gsm->txframe == NULL) {
+ kfree(gsm->buf);
+ kfree(gsm);
+@@ -2264,7 +2268,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
+ /* Check the MRU/MTU range looks sane */
+ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
+ return -EINVAL;
+- if (c->n2 < 3)
++ if (c->n2 > 255)
+ return -EINVAL;
+ if (c->encapsulation > 1) /* Basic, advanced, no I */
+ return -EINVAL;
+@@ -2879,19 +2883,17 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
+
+ static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
+ {
+- u8 modembits[5];
++ u8 modembits[3];
+ struct gsm_control *ctrl;
+ int len = 2;
+
+- if (brk)
++ modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
++ modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
++ if (brk) {
++ modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
+ len++;
+-
+- modembits[0] = len << 1 | EA; /* Data bytes */
+- modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
+- modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
+- if (brk)
+- modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
+- ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
++ }
++ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
+ if (ctrl == NULL)
+ return -ENOMEM;
+ return gsm_control_wait(dlci->gsm, ctrl);
+diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
+index fd443bc4c2983..92e2ee2785239 100644
+--- a/drivers/tty/serial/8250/8250_pci.c
++++ b/drivers/tty/serial/8250/8250_pci.c
+@@ -2907,7 +2907,7 @@ enum pci_board_num_t {
+ pbn_panacom2,
+ pbn_panacom4,
+ pbn_plx_romulus,
+- pbn_endrun_2_4000000,
++ pbn_endrun_2_3906250,
+ pbn_oxsemi,
+ pbn_oxsemi_1_4000000,
+ pbn_oxsemi_2_4000000,
+@@ -3434,10 +3434,10 @@ static struct pciserial_board pci_boards[] = {
+ * signal now many ports are available
+ * 2 port 952 Uart support
+ */
+- [pbn_endrun_2_4000000] = {
++ [pbn_endrun_2_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+- .base_baud = 4000000,
++ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+@@ -4345,7 +4345,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
+ */
+ { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+- pbn_endrun_2_4000000 },
++ pbn_endrun_2_3906250 },
+ /*
+ * Quatech cards. These actually have configurable clocks but for
+ * now we just use the default.
+diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
+index 87567515591e1..c1891c55897ad 100644
+--- a/drivers/tty/serial/8250/8250_port.c
++++ b/drivers/tty/serial/8250/8250_port.c
+@@ -3184,7 +3184,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
+
+ serial8250_set_divisor(port, baud, quot, frac);
+ serial_port_out(port, UART_LCR, up->lcr);
+- serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
++ serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
+ }
+
+ /*
+diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
+index e5ed4ab2b08df..8b41a783b37ee 100644
+--- a/drivers/tty/serial/imx.c
++++ b/drivers/tty/serial/imx.c
+@@ -1401,7 +1401,7 @@ static int imx_uart_startup(struct uart_port *port)
+ imx_uart_writel(sport, ucr1, UCR1);
+
+ ucr4 = imx_uart_readl(sport, UCR4) & ~UCR4_OREN;
+- if (!sport->dma_is_enabled)
++ if (!dma_is_inited)
+ ucr4 |= UCR4_OREN;
+ imx_uart_writel(sport, ucr4, UCR4);
+
+diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
+index a118c44c70e1e..d5f233fa6f3b4 100644
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -404,6 +404,9 @@ static const struct usb_device_id usb_quirk_list[] = {
+ { USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+ USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
++ /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
++ { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
++
+ /* Realtek hub in Dell WD19 (Type-C) */
+ { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+ { USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },
+@@ -508,6 +511,9 @@ static const struct usb_device_id usb_quirk_list[] = {
+ /* DJI CineSSD */
+ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
++ /* VCOM device */
++ { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
++
+ /* INTEL VALUE SSD */
+ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 2c68ec60d39a3..8cc81f193e9c1 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -1229,10 +1229,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
+ u8 lpm_nyet_threshold;
+ u8 tx_de_emphasis;
+ u8 hird_threshold;
+- u8 rx_thr_num_pkt_prd;
+- u8 rx_max_burst_prd;
+- u8 tx_thr_num_pkt_prd;
+- u8 tx_max_burst_prd;
++ u8 rx_thr_num_pkt_prd = 0;
++ u8 rx_max_burst_prd = 0;
++ u8 tx_thr_num_pkt_prd = 0;
++ u8 tx_max_burst_prd = 0;
+
+ /* default to highest possible threshold */
+ lpm_nyet_threshold = 0xf;
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index a1d8cb69d229d..18a53a3dfac6c 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -2728,6 +2728,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
+ const struct dwc3_event_depevt *event,
+ struct dwc3_request *req, int status)
+ {
++ int request_status;
+ int ret;
+
+ if (req->request.num_mapped_sgs)
+@@ -2757,7 +2758,35 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
+ req->needs_extra_trb = false;
+ }
+
+- dwc3_gadget_giveback(dep, req, status);
++ /*
++ * The event status only reflects the status of the TRB with IOC set.
++ * For the requests that don't set interrupt on completion, the driver
++ * needs to check and return the status of the completed TRBs associated
++ * with the request. Use the status of the last TRB of the request.
++ */
++ if (req->request.no_interrupt) {
++ struct dwc3_trb *trb;
++
++ trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
++ switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
++ case DWC3_TRBSTS_MISSED_ISOC:
++ /* Isoc endpoint only */
++ request_status = -EXDEV;
++ break;
++ case DWC3_TRB_STS_XFER_IN_PROG:
++ /* Applicable when End Transfer with ForceRM=0 */
++ case DWC3_TRBSTS_SETUP_PENDING:
++ /* Control endpoint only */
++ case DWC3_TRBSTS_OK:
++ default:
++ request_status = 0;
++ break;
++ }
++ } else {
++ request_status = status;
++ }
++
++ dwc3_gadget_giveback(dep, req, request_status);
+
+ out:
+ return ret;
+diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
+index 3d4710cc34bc1..2350e97a1662c 100644
+--- a/drivers/usb/gadget/configfs.c
++++ b/drivers/usb/gadget/configfs.c
+@@ -1412,6 +1412,8 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
+ usb_ep_autoconfig_reset(cdev->gadget);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev->gadget = NULL;
++ cdev->deactivations = 0;
++ gadget->deactivated = false;
+ set_gadget_data(gadget, NULL);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ }
+diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
+index 61e2c94cc0b0c..cab1e30462c24 100644
+--- a/drivers/usb/gadget/function/uvc_queue.c
++++ b/drivers/usb/gadget/function/uvc_queue.c
+@@ -242,6 +242,8 @@ void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+ buf->state = UVC_BUF_STATE_ERROR;
+ vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
+ }
++ queue->buf_used = 0;
++
+ /* This must be protected by the irqlock spinlock to avoid race
+ * conditions between uvc_queue_buffer and the disconnection event that
+ * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
+index db65e1ad00deb..dd46c15c4853f 100644
+--- a/drivers/usb/host/xhci-hub.c
++++ b/drivers/usb/host/xhci-hub.c
+@@ -1343,7 +1343,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
+- msecs_to_jiffies(100)))
++ msecs_to_jiffies(500)))
+ xhci_dbg(xhci, "missing U0 port change event for port %d\n",
+ wIndex);
+ spin_lock_irqsave(&xhci->lock, flags);
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index 7fa27b4037560..6cedae902adf9 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -2932,6 +2932,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
+ if (event_loop++ < TRBS_PER_SEGMENT / 2)
+ continue;
+ xhci_update_erst_dequeue(xhci, event_ring_deq);
++ event_ring_deq = xhci->event_ring->dequeue;
++
+ event_loop = 0;
+ }
+
+diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
+index 476dc6abd5a21..2f59d447411b5 100644
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -779,6 +779,17 @@ void xhci_shutdown(struct usb_hcd *hcd)
+ if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
+ usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+
++ /* Don't poll the roothubs after shutdown. */
++ xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
++ __func__, hcd->self.busnum);
++ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
++ del_timer_sync(&hcd->rh_timer);
++
++ if (xhci->shared_hcd) {
++ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
++ del_timer_sync(&xhci->shared_hcd->rh_timer);
++ }
++
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+ /* Workaround for spurious wakeups at shutdown with HSW */
+diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
+index 748139d262633..0be8efcda15d5 100644
+--- a/drivers/usb/misc/uss720.c
++++ b/drivers/usb/misc/uss720.c
+@@ -71,6 +71,7 @@ static void destroy_priv(struct kref *kref)
+
+ dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
+ usb_put_dev(priv->usbdev);
++ priv->usbdev = NULL;
+ kfree(priv);
+ }
+
+@@ -736,7 +737,6 @@ static int uss720_probe(struct usb_interface *intf,
+ parport_announce_port(pp);
+
+ usb_set_intfdata(intf, pp);
+- usb_put_dev(usbdev);
+ return 0;
+
+ probe_abort:
+@@ -754,7 +754,6 @@ static void uss720_disconnect(struct usb_interface *intf)
+ usb_set_intfdata(intf, NULL);
+ if (pp) {
+ priv = pp->private_data;
+- priv->usbdev = NULL;
+ priv->pp = NULL;
+ dev_dbg(&intf->dev, "parport_remove_port\n");
+ parport_remove_port(pp);
+diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
+index 08e18448e8b82..db30365345e0f 100644
+--- a/drivers/usb/mtu3/mtu3_dr.c
++++ b/drivers/usb/mtu3/mtu3_dr.c
+@@ -41,10 +41,8 @@ static char *mailbox_state_string(enum mtu3_vbus_id_state state)
+
+ static void toggle_opstate(struct ssusb_mtk *ssusb)
+ {
+- if (!ssusb->otg_switch.is_u3_drd) {
+- mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+- mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
+- }
++ mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
++ mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
+ }
+
+ /* only port0 supports dual-role mode */
+diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
+index dfa7c504befe8..d5a1832aa48eb 100644
+--- a/drivers/usb/serial/cp210x.c
++++ b/drivers/usb/serial/cp210x.c
+@@ -195,6 +195,8 @@ static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
++ { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
++ { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
+ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
+index 839eac04b5e30..fa978412601aa 100644
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -432,6 +432,8 @@ static void option_instat_callback(struct urb *urb);
+ #define CINTERION_PRODUCT_CLS8 0x00b0
+ #define CINTERION_PRODUCT_MV31_MBIM 0x00b3
+ #define CINTERION_PRODUCT_MV31_RMNET 0x00b7
++#define CINTERION_PRODUCT_MV32_WA 0x00f1
++#define CINTERION_PRODUCT_MV32_WB 0x00f2
+
+ /* Olivetti products */
+ #define OLIVETTI_VENDOR_ID 0x0b3c
+@@ -1217,6 +1219,10 @@ static const struct usb_device_id option_ids[] = {
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */
+ .driver_info = NCTRL(2) | RSVD(3) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff), /* Telit FN980 */
++ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff), /* Telit FN980 (PCIe) */
++ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */
+@@ -1233,6 +1239,8 @@ static const struct usb_device_id option_ids[] = {
+ .driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */
++ .driver_info = RSVD(0) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
+@@ -1969,6 +1977,10 @@ static const struct usb_device_id option_ids[] = {
+ .driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
+ .driver_info = RSVD(0)},
++ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
++ .driver_info = RSVD(3)},
++ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
++ .driver_info = RSVD(3)},
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
+ .driver_info = RSVD(4) },
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
+diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
+index ca3bd58f2025a..5576cfa50bc80 100644
+--- a/drivers/usb/serial/whiteheat.c
++++ b/drivers/usb/serial/whiteheat.c
+@@ -599,9 +599,8 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
+ switch (command) {
+ case WHITEHEAT_GET_DTR_RTS:
+ info = usb_get_serial_port_data(port);
+- memcpy(&info->mcr, command_info->result_buffer,
+- sizeof(struct whiteheat_dr_info));
+- break;
++ info->mcr = command_info->result_buffer[0];
++ break;
+ }
+ }
+ exit:
+diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
+index f3934f2d3c443..0268e654cae68 100644
+--- a/drivers/usb/typec/ucsi/ucsi.c
++++ b/drivers/usb/typec/ucsi/ucsi.c
+@@ -748,14 +748,18 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
+ if (ret < 0)
+ goto out_unlock;
+
++ mutex_unlock(&con->lock);
++
+ if (!wait_for_completion_timeout(&con->complete,
+- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+- ret = -ETIMEDOUT;
++ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
++ return -ETIMEDOUT;
++
++ return 0;
+
+ out_unlock:
+ mutex_unlock(&con->lock);
+
+- return ret < 0 ? ret : 0;
++ return ret;
+ }
+
+ static int
+@@ -780,11 +784,13 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
+ if (ret < 0)
+ goto out_unlock;
+
++ mutex_unlock(&con->lock);
++
+ if (!wait_for_completion_timeout(&con->complete,
+- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
+- ret = -ETIMEDOUT;
+- goto out_unlock;
+- }
++ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
++ return -ETIMEDOUT;
++
++ mutex_lock(&con->lock);
+
+ /* Something has gone wrong while swapping the role */
+ if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
+diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
+index e269b1391e146..8e8af408998ea 100644
+--- a/drivers/video/fbdev/udlfb.c
++++ b/drivers/video/fbdev/udlfb.c
+@@ -1650,8 +1650,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ const struct device_attribute *attr;
+ struct dlfb_data *dlfb;
+ struct fb_info *info;
+- int retval = -ENOMEM;
++ int retval;
+ struct usb_device *usbdev = interface_to_usbdev(intf);
++ struct usb_endpoint_descriptor *out;
+
+ /* usb initialization */
+ dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
+@@ -1665,6 +1666,12 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ dlfb->udev = usb_get_dev(usbdev);
+ usb_set_intfdata(intf, dlfb);
+
++ retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL);
++ if (retval) {
++ dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n");
++ goto error;
++ }
++
+ dev_dbg(&intf->dev, "console enable=%d\n", console);
+ dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
+ dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
+@@ -1674,6 +1681,7 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
+ dev_err(&intf->dev,
+ "firmware not recognized, incompatible device?\n");
++ retval = -ENODEV;
+ goto error;
+ }
+
+@@ -1687,8 +1695,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+
+ /* allocates framebuffer driver structure, not framebuffer memory */
+ info = framebuffer_alloc(0, &dlfb->udev->dev);
+- if (!info)
++ if (!info) {
++ retval = -ENOMEM;
+ goto error;
++ }
+
+ dlfb->info = info;
+ info->par = dlfb;
+diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
+index defee1d208d22..7985fe25850b7 100644
+--- a/fs/cifs/smb2ops.c
++++ b/fs/cifs/smb2ops.c
+@@ -1643,9 +1643,17 @@ smb2_copychunk_range(const unsigned int xid,
+ int chunks_copied = 0;
+ bool chunk_sizes_updated = false;
+ ssize_t bytes_written, total_bytes_written = 0;
++ struct inode *inode;
+
+ pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
+
++ /*
++ * We need to flush all unwritten data before we can send the
++ * copychunk ioctl to the server.
++ */
++ inode = d_inode(trgtfile->dentry);
++ filemap_write_and_wait(inode->i_mapping);
++
+ if (pcchunk == NULL)
+ return -ENOMEM;
+
+diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
+index 358398b1fe0c9..7d039ba5ae28b 100644
+--- a/fs/hugetlbfs/inode.c
++++ b/fs/hugetlbfs/inode.c
+@@ -38,6 +38,7 @@
+ #include <linux/uio.h>
+
+ #include <linux/uaccess.h>
++#include <linux/sched/mm.h>
+
+ static const struct super_operations hugetlbfs_ops;
+ static const struct address_space_operations hugetlbfs_aops;
+@@ -200,6 +201,54 @@ out:
+ */
+
+ #ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
++static unsigned long
++hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
++ unsigned long len, unsigned long pgoff, unsigned long flags)
++{
++ struct hstate *h = hstate_file(file);
++ struct vm_unmapped_area_info info;
++
++ info.flags = 0;
++ info.length = len;
++ info.low_limit = current->mm->mmap_base;
++ info.high_limit = arch_get_mmap_end(addr);
++ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
++ info.align_offset = 0;
++ return vm_unmapped_area(&info);
++}
++
++static unsigned long
++hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
++ unsigned long len, unsigned long pgoff, unsigned long flags)
++{
++ struct hstate *h = hstate_file(file);
++ struct vm_unmapped_area_info info;
++
++ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
++ info.length = len;
++ info.low_limit = max(PAGE_SIZE, mmap_min_addr);
++ info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
++ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
++ info.align_offset = 0;
++ addr = vm_unmapped_area(&info);
++
++ /*
++ * A failed mmap() very likely causes application failure,
++ * so fall back to the bottom-up function here. This scenario
++ * can happen with large stack limits and large mmap()
++ * allocations.
++ */
++ if (unlikely(offset_in_page(addr))) {
++ VM_BUG_ON(addr != -ENOMEM);
++ info.flags = 0;
++ info.low_limit = current->mm->mmap_base;
++ info.high_limit = arch_get_mmap_end(addr);
++ addr = vm_unmapped_area(&info);
++ }
++
++ return addr;
++}
++
+ static unsigned long
+ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+@@ -207,7 +256,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ struct hstate *h = hstate_file(file);
+- struct vm_unmapped_area_info info;
++ const unsigned long mmap_end = arch_get_mmap_end(addr);
+
+ if (len & ~huge_page_mask(h))
+ return -EINVAL;
+@@ -223,18 +272,21 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ if (addr) {
+ addr = ALIGN(addr, huge_page_size(h));
+ vma = find_vma(mm, addr);
+- if (TASK_SIZE - len >= addr &&
++ if (mmap_end - len >= addr &&
+ (!vma || addr + len <= vm_start_gap(vma)))
+ return addr;
+ }
+
+- info.flags = 0;
+- info.length = len;
+- info.low_limit = TASK_UNMAPPED_BASE;
+- info.high_limit = TASK_SIZE;
+- info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+- info.align_offset = 0;
+- return vm_unmapped_area(&info);
++ /*
++ * Use mm->get_unmapped_area value as a hint to use topdown routine.
++ * If architectures have special needs, they should define their own
++ * version of hugetlb_get_unmapped_area.
++ */
++ if (mm->get_unmapped_area == arch_get_unmapped_area_topdown)
++ return hugetlb_get_unmapped_area_topdown(file, addr, len,
++ pgoff, flags);
++ return hugetlb_get_unmapped_area_bottomup(file, addr, len,
++ pgoff, flags);
+ }
+ #endif
+
+diff --git a/include/linux/kernel.h b/include/linux/kernel.h
+index d83d403dac2ea..77c86a2236daf 100644
+--- a/include/linux/kernel.h
++++ b/include/linux/kernel.h
+@@ -627,7 +627,7 @@ static inline char *hex_byte_pack_upper(char *buf, u8 byte)
+ return buf;
+ }
+
+-extern int hex_to_bin(char ch);
++extern int hex_to_bin(unsigned char ch);
+ extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
+ extern char *bin2hex(char *dst, const void *src, size_t count);
+
+diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
+index 3a1d899019af0..ab0da04ac9ee7 100644
+--- a/include/linux/sched/mm.h
++++ b/include/linux/sched/mm.h
+@@ -133,6 +133,14 @@ static inline void mm_update_next_owner(struct mm_struct *mm)
+ #endif /* CONFIG_MEMCG */
+
+ #ifdef CONFIG_MMU
++#ifndef arch_get_mmap_end
++#define arch_get_mmap_end(addr) (TASK_SIZE)
++#endif
++
++#ifndef arch_get_mmap_base
++#define arch_get_mmap_base(addr, base) (base)
++#endif
++
+ extern void arch_pick_mmap_layout(struct mm_struct *mm,
+ struct rlimit *rlim_stack);
+ extern unsigned long
+diff --git a/include/net/tcp.h b/include/net/tcp.h
+index b914959cd2c67..9237362e56065 100644
+--- a/include/net/tcp.h
++++ b/include/net/tcp.h
+@@ -603,6 +603,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req);
+ void tcp_reset(struct sock *sk);
+ void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
+ void tcp_fin(struct sock *sk);
++void tcp_check_space(struct sock *sk);
+
+ /* tcp_timer.c */
+ void tcp_init_xmit_timers(struct sock *);
+@@ -1030,6 +1031,7 @@ struct rate_sample {
+ int losses; /* number of packets marked lost upon ACK */
+ u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */
+ u32 prior_in_flight; /* in flight before this ACK */
++ u32 last_end_seq; /* end_seq of most recently ACKed packet */
+ bool is_app_limited; /* is sample from packet with bubble in pipe? */
+ bool is_retrans; /* is sample from retransmission? */
+ bool is_ack_delayed; /* is this (likely) a delayed ACK? */
+@@ -1139,6 +1141,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
+ bool is_sack_reneg, struct rate_sample *rs);
+ void tcp_rate_check_app_limited(struct sock *sk);
+
++static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2)
++{
++ return t1 > t2 || (t1 == t2 && after(seq1, seq2));
++}
++
+ /* These functions determine how the current flow behaves in respect of SACK
+ * handling. SACK is negotiated with the peer, and therefore it can vary
+ * between different flows.
+diff --git a/lib/hexdump.c b/lib/hexdump.c
+index 147133f8eb2fc..c0a08ddcf94e2 100644
+--- a/lib/hexdump.c
++++ b/lib/hexdump.c
+@@ -21,15 +21,33 @@ EXPORT_SYMBOL(hex_asc_upper);
+ *
+ * hex_to_bin() converts one hex digit to its actual value or -1 in case of bad
+ * input.
++ *
++ * This function is used to load cryptographic keys, so it is coded in such a
++ * way that there are no conditions or memory accesses that depend on data.
++ *
++ * Explanation of the logic:
++ * (ch - '9' - 1) is negative if ch <= '9'
++ * ('0' - 1 - ch) is negative if ch >= '0'
++ * we "and" these two values, so the result is negative if ch is in the range
++ * '0' ... '9'
++ * we are only interested in the sign, so we do a shift ">> 8"; note that right
++ * shift of a negative value is implementation-defined, so we cast the
++ * value to (unsigned) before the shift --- we have 0xffffff if ch is in
++ * the range '0' ... '9', 0 otherwise
++ * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is
++ * in the range '0' ... '9', 0 otherwise
++ * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0'
++ * ... '9', -1 otherwise
++ * the next line is similar to the previous one, but we need to decode both
++ * uppercase and lowercase letters, so we use (ch & 0xdf), which converts
++ * lowercase to uppercase
+ */
+-int hex_to_bin(char ch)
++int hex_to_bin(unsigned char ch)
+ {
+- if ((ch >= '0') && (ch <= '9'))
+- return ch - '0';
+- ch = tolower(ch);
+- if ((ch >= 'a') && (ch <= 'f'))
+- return ch - 'a' + 10;
+- return -1;
++ unsigned char cu = ch & 0xdf;
++ return -1 +
++ ((ch - '0' + 1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) +
++ ((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8);
+ }
+ EXPORT_SYMBOL(hex_to_bin);
+
+@@ -44,10 +62,13 @@ EXPORT_SYMBOL(hex_to_bin);
+ int hex2bin(u8 *dst, const char *src, size_t count)
+ {
+ while (count--) {
+- int hi = hex_to_bin(*src++);
+- int lo = hex_to_bin(*src++);
++ int hi, lo;
+
+- if ((hi < 0) || (lo < 0))
++ hi = hex_to_bin(*src++);
++ if (unlikely(hi < 0))
++ return -EINVAL;
++ lo = hex_to_bin(*src++);
++ if (unlikely(lo < 0))
+ return -EINVAL;
+
+ *dst++ = (hi << 4) | lo;
+diff --git a/mm/mmap.c b/mm/mmap.c
+index 58cfd5b1e0b16..88e6863677768 100644
+--- a/mm/mmap.c
++++ b/mm/mmap.c
+@@ -2077,14 +2077,6 @@ found_highest:
+ }
+
+
+-#ifndef arch_get_mmap_end
+-#define arch_get_mmap_end(addr) (TASK_SIZE)
+-#endif
+-
+-#ifndef arch_get_mmap_base
+-#define arch_get_mmap_base(addr, base) (base)
+-#endif
+-
+ /* Get an address range which is currently unmapped.
+ * For shmat() with addr=0.
+ *
+diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
+index a5502c5aa44e7..bf270b6a99b4f 100644
+--- a/net/core/lwt_bpf.c
++++ b/net/core/lwt_bpf.c
+@@ -158,10 +158,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
+ return dst->lwtstate->orig_output(net, sk, skb);
+ }
+
+-static int xmit_check_hhlen(struct sk_buff *skb)
++static int xmit_check_hhlen(struct sk_buff *skb, int hh_len)
+ {
+- int hh_len = skb_dst(skb)->dev->hard_header_len;
+-
+ if (skb_headroom(skb) < hh_len) {
+ int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
+
+@@ -273,6 +271,7 @@ static int bpf_xmit(struct sk_buff *skb)
+
+ bpf = bpf_lwt_lwtunnel(dst->lwtstate);
+ if (bpf->xmit.prog) {
++ int hh_len = dst->dev->hard_header_len;
+ __be16 proto = skb->protocol;
+ int ret;
+
+@@ -290,7 +289,7 @@ static int bpf_xmit(struct sk_buff *skb)
+ /* If the header was expanded, headroom might be too
+ * small for L2 header to come, expand as needed.
+ */
+- ret = xmit_check_hhlen(skb);
++ ret = xmit_check_hhlen(skb, hh_len);
+ if (unlikely(ret))
+ return ret;
+
+diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
+index f67f1d27f5655..5b38d03f6d79a 100644
+--- a/net/ipv4/ip_gre.c
++++ b/net/ipv4/ip_gre.c
+@@ -432,14 +432,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
+ __be16 proto)
+ {
+ struct ip_tunnel *tunnel = netdev_priv(dev);
+-
+- if (tunnel->parms.o_flags & TUNNEL_SEQ)
+- tunnel->o_seqno++;
++ __be16 flags = tunnel->parms.o_flags;
+
+ /* Push GRE header. */
+ gre_build_header(skb, tunnel->tun_hlen,
+- tunnel->parms.o_flags, proto, tunnel->parms.o_key,
+- htonl(tunnel->o_seqno));
++ flags, proto, tunnel->parms.o_key,
++ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+
+ ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
+ }
+diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
+index c0fcfa2964686..b0e6fc2c5e108 100644
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -3717,7 +3717,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
+ tcp_process_tlp_ack(sk, ack, flag);
+
+ if (tcp_ack_is_dubious(sk, flag)) {
+- if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) {
++ if (!(flag & (FLAG_SND_UNA_ADVANCED |
++ FLAG_NOT_DUP | FLAG_DSACKING_ACK))) {
+ num_dupack = 1;
+ /* Consider if pure acks were aggregated in tcp_add_backlog() */
+ if (!(flag & FLAG_DATA))
+@@ -5230,7 +5231,17 @@ static void tcp_new_space(struct sock *sk)
+ sk->sk_write_space(sk);
+ }
+
+-static void tcp_check_space(struct sock *sk)
++/* Caller made space either from:
++ * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced)
++ * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt)
++ *
++ * We might be able to generate EPOLLOUT to the application if:
++ * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2
++ * 2) notsent amount (tp->write_seq - tp->snd_nxt) became
++ * small enough that tcp_stream_memory_free() decides it
++ * is time to generate EPOLLOUT.
++ */
++void tcp_check_space(struct sock *sk)
+ {
+ if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) {
+ sock_reset_flag(sk, SOCK_QUEUE_SHRUNK);
+diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
+index 194743bd3fc10..9b038cb0a43d2 100644
+--- a/net/ipv4/tcp_minisocks.c
++++ b/net/ipv4/tcp_minisocks.c
+@@ -538,7 +538,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
+ newtp->tsoffset = treq->ts_off;
+ #ifdef CONFIG_TCP_MD5SIG
+ newtp->md5sig_info = NULL; /*XXX*/
+- if (newtp->af_specific->md5_lookup(sk, newsk))
++ if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req)))
+ newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
+ #endif
+ if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
+diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
+index 139e962d1aef3..67493ec6318ad 100644
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -81,6 +81,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
+
+ NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT,
+ tcp_skb_pcount(skb));
++ tcp_check_space(sk);
+ }
+
+ /* SND.NXT, if window was not shrunk or the amount of shrunk was less than one
+diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
+index 0de6935659635..6ab197928abbc 100644
+--- a/net/ipv4/tcp_rate.c
++++ b/net/ipv4/tcp_rate.c
+@@ -73,26 +73,31 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
+ *
+ * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
+ * called multiple times. We favor the information from the most recently
+- * sent skb, i.e., the skb with the highest prior_delivered count.
++ * sent skb, i.e., the skb with the most recently sent time and the highest
++ * sequence.
+ */
+ void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
+ struct rate_sample *rs)
+ {
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
++ u64 tx_tstamp;
+
+ if (!scb->tx.delivered_mstamp)
+ return;
+
++ tx_tstamp = tcp_skb_timestamp_us(skb);
+ if (!rs->prior_delivered ||
+- after(scb->tx.delivered, rs->prior_delivered)) {
++ tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp,
++ scb->end_seq, rs->last_end_seq)) {
+ rs->prior_delivered = scb->tx.delivered;
+ rs->prior_mstamp = scb->tx.delivered_mstamp;
+ rs->is_app_limited = scb->tx.is_app_limited;
+ rs->is_retrans = scb->sacked & TCPCB_RETRANS;
++ rs->last_end_seq = scb->end_seq;
+
+ /* Record send time of most recently ACKed packet: */
+- tp->first_tx_mstamp = tcp_skb_timestamp_us(skb);
++ tp->first_tx_mstamp = tx_tstamp;
+ /* Find the duration of the "send phase" of this window: */
+ rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp,
+ scb->tx.first_tx_mstamp);
+diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
+index 5dbc280d43856..e550db28aabb5 100644
+--- a/net/ipv6/ip6_gre.c
++++ b/net/ipv6/ip6_gre.c
+@@ -730,6 +730,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ struct ip_tunnel_info *tun_info;
+ const struct ip_tunnel_key *key;
+ __be16 flags;
++ int tun_hlen;
+
+ tun_info = skb_tunnel_info(skb);
+ if (unlikely(!tun_info ||
+@@ -748,9 +749,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ dsfield = key->tos;
+ flags = key->tun_flags &
+ (TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
+- tunnel->tun_hlen = gre_calc_hlen(flags);
++ tun_hlen = gre_calc_hlen(flags);
+
+- gre_build_header(skb, tunnel->tun_hlen,
++ gre_build_header(skb, tun_hlen,
+ flags, protocol,
+ tunnel_id_to_key32(tun_info->key.tun_id),
+ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
+diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
+index d1524ca4b90ef..a189079a6ea50 100644
+--- a/net/netfilter/ipvs/ip_vs_conn.c
++++ b/net/netfilter/ipvs/ip_vs_conn.c
+@@ -1421,7 +1421,7 @@ int __init ip_vs_conn_init(void)
+ pr_info("Connection hash table configured "
+ "(size=%d, memory=%ldKbytes)\n",
+ ip_vs_conn_tab_size,
+- (long)(ip_vs_conn_tab_size*sizeof(struct list_head))/1024);
++ (long)(ip_vs_conn_tab_size*sizeof(*ip_vs_conn_tab))/1024);
+ IP_VS_DBG(0, "Each connection entry needs %zd bytes at least\n",
+ sizeof(struct ip_vs_conn));
+
+diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c
+index 637ce3e8c575c..4026ec38526f6 100644
+--- a/net/netfilter/nft_socket.c
++++ b/net/netfilter/nft_socket.c
+@@ -14,6 +14,32 @@ struct nft_socket {
+ };
+ };
+
++static struct sock *nft_socket_do_lookup(const struct nft_pktinfo *pkt)
++{
++ const struct net_device *indev = nft_in(pkt);
++ const struct sk_buff *skb = pkt->skb;
++ struct sock *sk = NULL;
++
++ if (!indev)
++ return NULL;
++
++ switch (nft_pf(pkt)) {
++ case NFPROTO_IPV4:
++ sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, indev);
++ break;
++#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
++ case NFPROTO_IPV6:
++ sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, indev);
++ break;
++#endif
++ default:
++ WARN_ON_ONCE(1);
++ break;
++ }
++
++ return sk;
++}
++
+ static void nft_socket_eval(const struct nft_expr *expr,
+ struct nft_regs *regs,
+ const struct nft_pktinfo *pkt)
+@@ -27,20 +53,7 @@ static void nft_socket_eval(const struct nft_expr *expr,
+ sk = NULL;
+
+ if (!sk)
+- switch(nft_pf(pkt)) {
+- case NFPROTO_IPV4:
+- sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, nft_in(pkt));
+- break;
+-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
+- case NFPROTO_IPV6:
+- sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, nft_in(pkt));
+- break;
+-#endif
+- default:
+- WARN_ON_ONCE(1);
+- regs->verdict.code = NFT_BREAK;
+- return;
+- }
++ sk = nft_socket_do_lookup(pkt);
+
+ if (!sk) {
+ regs->verdict.code = NFT_BREAK;
+@@ -123,6 +136,16 @@ static int nft_socket_dump(struct sk_buff *skb,
+ return 0;
+ }
+
++static int nft_socket_validate(const struct nft_ctx *ctx,
++ const struct nft_expr *expr,
++ const struct nft_data **data)
++{
++ return nft_chain_validate_hooks(ctx->chain,
++ (1 << NF_INET_PRE_ROUTING) |
++ (1 << NF_INET_LOCAL_IN) |
++ (1 << NF_INET_LOCAL_OUT));
++}
++
+ static struct nft_expr_type nft_socket_type;
+ static const struct nft_expr_ops nft_socket_ops = {
+ .type = &nft_socket_type,
+@@ -130,6 +153,7 @@ static const struct nft_expr_ops nft_socket_ops = {
+ .eval = nft_socket_eval,
+ .init = nft_socket_init,
+ .dump = nft_socket_dump,
++ .validate = nft_socket_validate,
+ };
+
+ static struct nft_expr_type nft_socket_type __read_mostly = {
+diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
+index 0d225f891b61b..8d32229199b96 100644
+--- a/net/sctp/sm_sideeffect.c
++++ b/net/sctp/sm_sideeffect.c
+@@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t)
+ goto out_unlock;
+ }
+
++ /* This happens when the response arrives after the timer is triggered. */
++ if (!asoc->strreset_chunk)
++ goto out_unlock;
++
+ error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT,
+ SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF),
+ asoc->state, asoc->ep, asoc,
+diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
+index 5221092cc66d4..a5a8cca46bd5f 100644
+--- a/net/smc/af_smc.c
++++ b/net/smc/af_smc.c
+@@ -816,6 +816,8 @@ static void smc_connect_work(struct work_struct *work)
+ smc->sk.sk_state = SMC_CLOSED;
+ if (rc == -EPIPE || rc == -EAGAIN)
+ smc->sk.sk_err = EPIPE;
++ else if (rc == -ECONNREFUSED)
++ smc->sk.sk_err = ECONNREFUSED;
+ else if (signal_pending(current))
+ smc->sk.sk_err = -sock_intr_errno(timeo);
+ sock_put(&smc->sk); /* passive closing */
+diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
+index 0f034c3bc37d7..abb93f7343c53 100644
+--- a/net/tls/tls_device.c
++++ b/net/tls/tls_device.c
+@@ -470,11 +470,13 @@ handle_error:
+ copy = min_t(size_t, size, (pfrag->size - pfrag->offset));
+ copy = min_t(size_t, copy, (max_open_record_len - record->len));
+
+- rc = tls_device_copy_data(page_address(pfrag->page) +
+- pfrag->offset, copy, msg_iter);
+- if (rc)
+- goto handle_error;
+- tls_append_frag(record, pfrag, copy);
++ if (copy) {
++ rc = tls_device_copy_data(page_address(pfrag->page) +
++ pfrag->offset, copy, msg_iter);
++ if (rc)
++ goto handle_error;
++ tls_append_frag(record, pfrag, copy);
++ }
+
+ size -= copy;
+ if (!size) {
+diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
+index 6fd1bef848ed9..fa55d79b39b60 100644
+--- a/sound/soc/codecs/wm8731.c
++++ b/sound/soc/codecs/wm8731.c
+@@ -601,7 +601,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+ ret = wm8731_reset(wm8731->regmap);
+ if (ret < 0) {
+ dev_err(dev, "Failed to issue reset: %d\n", ret);
+- goto err_regulator_enable;
++ goto err;
+ }
+
+ /* Clear POWEROFF, keep everything else disabled */
+@@ -618,10 +618,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+
+ regcache_mark_dirty(wm8731->regmap);
+
+-err_regulator_enable:
+- /* Regulators will be enabled by bias management */
+- regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+-
++err:
+ return ret;
+ }
+
+@@ -765,21 +762,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
+ ret = PTR_ERR(wm8731->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+- return ret;
++ goto err_regulator_enable;
+ }
+
+ ret = wm8731_hw_init(&i2c->dev, wm8731);
+ if (ret != 0)
+- return ret;
++ goto err_regulator_enable;
+
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm8731, &wm8731_dai, 1);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
+- return ret;
++ goto err_regulator_enable;
+ }
+
+ return 0;
++
++err_regulator_enable:
++ /* Regulators will be enabled by bias management */
++ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
++
++ return ret;
+ }
+
+ static int wm8731_i2c_remove(struct i2c_client *client)
next reply other threads:[~2022-05-09 10:55 UTC|newest]
Thread overview: 305+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-09 10:55 Mike Pagano [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-04-18 3:06 [gentoo-commits] proj/linux-patches:5.4 commit in: / Alice Ferrazzi
2023-10-05 14:24 Mike Pagano
2023-09-23 10:18 Mike Pagano
2023-09-02 9:58 Mike Pagano
2023-08-30 14:56 Mike Pagano
2023-08-16 17:00 Mike Pagano
2023-08-11 11:57 Mike Pagano
2023-08-08 18:42 Mike Pagano
2023-07-27 11:51 Mike Pagano
2023-07-24 20:29 Mike Pagano
2023-06-28 10:28 Mike Pagano
2023-06-21 14:55 Alice Ferrazzi
2023-06-14 10:20 Mike Pagano
2023-06-09 11:32 Mike Pagano
2023-06-05 11:50 Mike Pagano
2023-05-30 12:56 Mike Pagano
2023-05-17 11:21 Mike Pagano
2023-05-17 11:00 Mike Pagano
2023-05-10 17:58 Mike Pagano
2023-04-26 9:51 Alice Ferrazzi
2023-04-20 11:17 Alice Ferrazzi
2023-04-05 10:01 Alice Ferrazzi
2023-03-30 13:41 Alice Ferrazzi
2023-03-22 14:16 Alice Ferrazzi
2023-03-17 10:46 Mike Pagano
2023-03-13 11:34 Alice Ferrazzi
2023-03-11 16:20 Mike Pagano
2023-03-03 12:31 Mike Pagano
2023-02-25 11:42 Mike Pagano
2023-02-24 3:08 Alice Ferrazzi
2023-02-22 14:41 Alice Ferrazzi
2023-02-06 12:48 Mike Pagano
2023-02-02 19:15 Mike Pagano
2023-01-24 7:25 Alice Ferrazzi
2023-01-18 11:10 Mike Pagano
2022-12-19 12:27 Alice Ferrazzi
2022-12-14 12:14 Mike Pagano
2022-12-08 12:13 Alice Ferrazzi
2022-11-25 17:05 Mike Pagano
2022-11-10 17:59 Mike Pagano
2022-11-03 15:13 Mike Pagano
2022-11-01 19:47 Mike Pagano
2022-10-29 9:52 Mike Pagano
2022-10-26 11:44 Mike Pagano
2022-10-17 16:48 Mike Pagano
2022-10-15 10:06 Mike Pagano
2022-10-07 11:12 Mike Pagano
2022-10-05 11:58 Mike Pagano
2022-09-28 9:26 Mike Pagano
2022-09-20 12:02 Mike Pagano
2022-09-15 10:31 Mike Pagano
2022-09-05 12:04 Mike Pagano
2022-08-25 10:34 Mike Pagano
2022-08-11 12:35 Mike Pagano
2022-08-03 14:51 Alice Ferrazzi
2022-07-29 15:29 Mike Pagano
2022-07-21 20:09 Mike Pagano
2022-07-15 10:04 Mike Pagano
2022-07-12 16:01 Mike Pagano
2022-07-07 16:18 Mike Pagano
2022-07-02 16:08 Mike Pagano
2022-06-29 11:09 Mike Pagano
2022-06-27 19:03 Mike Pagano
2022-06-25 19:46 Mike Pagano
2022-06-22 13:50 Mike Pagano
2022-06-22 13:25 Mike Pagano
2022-06-22 12:47 Mike Pagano
2022-06-16 11:43 Mike Pagano
2022-06-14 17:12 Mike Pagano
2022-06-06 11:04 Mike Pagano
2022-05-25 11:55 Mike Pagano
2022-05-18 9:49 Mike Pagano
2022-05-15 22:11 Mike Pagano
2022-05-12 11:30 Mike Pagano
2022-04-27 12:21 Mike Pagano
2022-04-20 12:08 Mike Pagano
2022-04-15 13:10 Mike Pagano
2022-04-12 19:21 Mike Pagano
2022-03-28 10:58 Mike Pagano
2022-03-23 11:57 Mike Pagano
2022-03-19 13:21 Mike Pagano
2022-03-16 13:31 Mike Pagano
2022-03-11 10:55 Mike Pagano
2022-03-08 18:31 Mike Pagano
2022-03-02 13:07 Mike Pagano
2022-02-23 12:38 Mike Pagano
2022-02-16 12:46 Mike Pagano
2022-02-11 12:36 Mike Pagano
2022-02-08 17:55 Mike Pagano
2022-02-05 12:14 Mike Pagano
2022-02-01 17:24 Mike Pagano
2022-01-31 13:01 Mike Pagano
2022-01-29 17:44 Mike Pagano
2022-01-27 11:38 Mike Pagano
2022-01-20 10:00 Mike Pagano
2022-01-16 10:22 Mike Pagano
2022-01-11 14:34 Mike Pagano
2022-01-05 12:54 Mike Pagano
2021-12-29 13:07 Mike Pagano
2021-12-22 14:06 Mike Pagano
2021-12-17 11:55 Mike Pagano
2021-12-16 16:51 Mike Pagano
2021-12-14 14:19 Mike Pagano
2021-12-08 12:54 Mike Pagano
2021-12-01 12:50 Mike Pagano
2021-11-26 11:58 Mike Pagano
2021-11-21 20:44 Mike Pagano
2021-11-17 12:00 Mike Pagano
2021-11-12 14:14 Mike Pagano
2021-11-06 13:26 Mike Pagano
2021-11-04 11:23 Mike Pagano
2021-11-02 19:31 Mike Pagano
2021-10-27 15:51 Mike Pagano
2021-10-27 11:58 Mike Pagano
2021-10-20 13:24 Mike Pagano
2021-10-17 13:12 Mike Pagano
2021-10-13 14:55 Alice Ferrazzi
2021-10-09 21:32 Mike Pagano
2021-10-06 14:06 Mike Pagano
2021-09-30 10:49 Mike Pagano
2021-09-26 14:13 Mike Pagano
2021-09-22 11:39 Mike Pagano
2021-09-20 22:03 Mike Pagano
2021-09-16 11:19 Mike Pagano
2021-09-15 12:00 Mike Pagano
2021-09-12 14:38 Mike Pagano
2021-09-03 11:21 Mike Pagano
2021-09-03 9:39 Alice Ferrazzi
2021-08-26 14:36 Mike Pagano
2021-08-18 12:46 Mike Pagano
2021-08-15 20:06 Mike Pagano
2021-08-12 11:52 Mike Pagano
2021-08-08 13:38 Mike Pagano
2021-08-04 11:53 Mike Pagano
2021-08-03 12:23 Mike Pagano
2021-07-31 10:32 Alice Ferrazzi
2021-07-28 12:36 Mike Pagano
2021-07-25 17:27 Mike Pagano
2021-07-20 15:39 Alice Ferrazzi
2021-07-19 11:18 Mike Pagano
2021-07-14 16:22 Mike Pagano
2021-07-13 12:37 Mike Pagano
2021-07-11 14:44 Mike Pagano
2021-07-07 13:13 Mike Pagano
2021-06-30 14:24 Mike Pagano
2021-06-23 15:11 Mike Pagano
2021-06-18 11:38 Mike Pagano
2021-06-16 12:23 Mike Pagano
2021-06-10 11:59 Mike Pagano
2021-06-07 11:23 Mike Pagano
2021-06-03 10:28 Alice Ferrazzi
2021-05-28 12:03 Alice Ferrazzi
2021-05-26 12:06 Mike Pagano
2021-05-22 10:04 Mike Pagano
2021-05-19 12:23 Mike Pagano
2021-05-14 14:10 Alice Ferrazzi
2021-05-11 14:20 Mike Pagano
2021-05-07 11:44 Alice Ferrazzi
2021-05-07 11:37 Mike Pagano
2021-05-02 16:02 Mike Pagano
2021-05-02 16:00 Mike Pagano
2021-04-30 19:01 Mike Pagano
2021-04-28 11:52 Alice Ferrazzi
2021-04-21 11:42 Mike Pagano
2021-04-16 11:14 Alice Ferrazzi
2021-04-14 11:20 Alice Ferrazzi
2021-04-10 13:25 Mike Pagano
2021-04-07 13:27 Mike Pagano
2021-03-30 13:12 Alice Ferrazzi
2021-03-24 12:09 Mike Pagano
2021-03-22 15:55 Mike Pagano
2021-03-20 14:32 Mike Pagano
2021-03-17 18:43 Mike Pagano
2021-03-16 16:04 Mike Pagano
2021-03-11 14:08 Mike Pagano
2021-03-09 12:18 Mike Pagano
2021-03-07 15:16 Mike Pagano
2021-03-04 14:51 Mike Pagano
2021-03-04 12:06 Alice Ferrazzi
2021-03-01 23:49 Mike Pagano
2021-03-01 23:44 Mike Pagano
2021-02-27 14:16 Mike Pagano
2021-02-26 10:01 Alice Ferrazzi
2021-02-23 17:01 Mike Pagano
2021-02-23 14:28 Alice Ferrazzi
2021-02-17 11:39 Alice Ferrazzi
2021-02-13 14:46 Alice Ferrazzi
2021-02-10 9:53 Alice Ferrazzi
2021-02-07 15:24 Alice Ferrazzi
2021-02-03 23:48 Mike Pagano
2021-01-30 13:37 Alice Ferrazzi
2021-01-27 11:13 Mike Pagano
2021-01-23 17:50 Mike Pagano
2021-01-23 16:37 Mike Pagano
2021-01-19 20:32 Mike Pagano
2021-01-17 16:19 Mike Pagano
2021-01-12 20:05 Mike Pagano
2021-01-09 17:51 Mike Pagano
2021-01-08 16:08 Mike Pagano
2021-01-06 14:14 Mike Pagano
2020-12-30 12:53 Mike Pagano
2020-12-21 13:27 Mike Pagano
2020-12-16 23:14 Mike Pagano
2020-12-11 12:56 Mike Pagano
2020-12-08 12:07 Mike Pagano
2020-12-02 12:50 Mike Pagano
2020-11-26 14:27 Mike Pagano
2020-11-24 14:44 Mike Pagano
2020-11-22 19:31 Mike Pagano
2020-11-18 20:19 Mike Pagano
2020-11-18 20:10 Mike Pagano
2020-11-18 20:03 Mike Pagano
2020-11-13 12:16 Mike Pagano
2020-11-11 15:48 Mike Pagano
2020-11-10 13:57 Mike Pagano
2020-11-05 12:36 Mike Pagano
2020-11-01 20:31 Mike Pagano
2020-10-29 11:19 Mike Pagano
2020-10-17 10:18 Mike Pagano
2020-10-14 20:37 Mike Pagano
2020-10-07 12:48 Mike Pagano
2020-10-01 12:49 Mike Pagano
2020-09-26 21:59 Mike Pagano
2020-09-24 15:38 Mike Pagano
2020-09-24 15:38 Mike Pagano
2020-09-24 15:38 Mike Pagano
2020-09-23 12:10 Mike Pagano
2020-09-17 14:56 Mike Pagano
2020-09-12 18:08 Mike Pagano
2020-09-09 18:00 Mike Pagano
2020-09-08 22:26 Mike Pagano
2020-09-05 10:47 Mike Pagano
2020-09-03 11:38 Mike Pagano
2020-08-26 11:16 Mike Pagano
2020-08-21 13:25 Alice Ferrazzi
2020-08-19 9:28 Alice Ferrazzi
2020-08-12 23:30 Alice Ferrazzi
2020-08-07 12:16 Alice Ferrazzi
2020-08-05 14:45 Thomas Deutschmann
2020-08-01 19:45 Mike Pagano
2020-07-31 18:28 Mike Pagano
2020-07-31 18:04 Mike Pagano
2020-07-30 14:58 Mike Pagano
2020-07-29 12:40 Mike Pagano
2020-07-22 12:53 Mike Pagano
2020-07-16 11:19 Mike Pagano
2020-07-09 12:13 Mike Pagano
2020-07-01 12:23 Mike Pagano
2020-06-29 17:40 Mike Pagano
2020-06-24 16:49 Mike Pagano
2020-06-22 14:48 Mike Pagano
2020-06-17 16:40 Mike Pagano
2020-06-10 19:42 Mike Pagano
2020-06-07 21:53 Mike Pagano
2020-06-03 11:43 Mike Pagano
2020-06-02 11:37 Mike Pagano
2020-05-27 16:31 Mike Pagano
2020-05-20 11:37 Mike Pagano
2020-05-20 11:33 Mike Pagano
2020-05-14 11:32 Mike Pagano
2020-05-13 12:18 Mike Pagano
2020-05-11 22:49 Mike Pagano
2020-05-09 22:12 Mike Pagano
2020-05-06 11:47 Mike Pagano
2020-05-02 19:24 Mike Pagano
2020-05-02 13:25 Mike Pagano
2020-04-29 17:56 Mike Pagano
2020-04-23 11:55 Mike Pagano
2020-04-21 11:19 Mike Pagano
2020-04-17 11:46 Mike Pagano
2020-04-15 15:52 Mike Pagano
2020-04-13 11:18 Mike Pagano
2020-04-08 12:42 Mike Pagano
2020-04-02 15:26 Mike Pagano
2020-04-01 12:03 Mike Pagano
2020-03-25 15:01 Mike Pagano
2020-03-21 18:58 Mike Pagano
2020-03-18 14:23 Mike Pagano
2020-03-12 14:04 Mike Pagano
2020-03-05 16:26 Mike Pagano
2020-02-28 16:41 Mike Pagano
2020-02-24 11:09 Mike Pagano
2020-02-19 23:48 Mike Pagano
2020-02-14 23:55 Mike Pagano
2020-02-11 15:35 Mike Pagano
2020-02-06 11:07 Mike Pagano
2020-02-01 10:53 Mike Pagano
2020-02-01 10:31 Mike Pagano
2020-01-29 16:18 Mike Pagano
2020-01-26 12:27 Mike Pagano
2020-01-23 11:09 Mike Pagano
2020-01-17 19:57 Mike Pagano
2020-01-14 22:33 Mike Pagano
2020-01-12 15:01 Mike Pagano
2020-01-09 11:17 Mike Pagano
2020-01-04 19:59 Mike Pagano
2019-12-31 17:48 Mike Pagano
2019-12-30 23:03 Mike Pagano
2019-12-21 15:01 Mike Pagano
2019-12-18 19:30 Mike Pagano
2019-12-17 21:57 Mike Pagano
2019-12-13 12:39 Mike Pagano
2019-12-05 1:04 Thomas Deutschmann
2019-11-29 21:21 Thomas Deutschmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1652093707.7aedd27a1f216799c288196924d35eb33df1eb1f.mpagano@gentoo \
--to=mpagano@gentoo.org \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox