[gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/

["Sam James" <sam@gentoo.org>]

commit:     3229119273afb0f45da6b72f2b3b17ed1286f63a
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Nov 10 03:18:05 2021 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Nov 10 03:19:14 2021 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=32291192

sys-libs/ncurses: add 6.3_p20211106 (unkeyworded; for cross/bootstrap testing)

There was a bit of a kerfuffle re changes in 6.3 to parse pkg-config's
debug output to get its paths. That has since been fixed (after 6.3
was cut) along with some other useful pkg-config changes. Let's
pull them in to try avoid a bootstrap/cross issue I hit.

Unkeyworded for now.

Signed-off-by: Sam James <sam <AT> gentoo.org>

 sys-libs/ncurses/Manifest                     |   3 +
 sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 355 ++++++++++++++++++++++++++
 2 files changed, 358 insertions(+)

diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 1ac19e4d9cb..71621376f4c 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,3 +1,6 @@
 DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
 DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
+DIST ncurses-6.3-20211026.patch.gz 117363 BLAKE2B 74c6c80271edc3b69d17c891436e48ee0579b3d16dd1bbd42f953be5b6ef07596343abd34f4d508b0cb371c1c0febfec12d65e938739892a617c8b141f599753 SHA512 25a99bc9cb7a18eb8fd16a0f887bae90c2551e0228b077d28f7217e58190f4b19a526350c999922f7394a1b749e834643c1bf5f339248b842717c146a3ec1df4
+DIST ncurses-6.3-20211030.patch.gz 46304 BLAKE2B 6fa0f5223c97dc045117c208b92e75aad61638585506aeed0fa5cd6b215f67d212fc780e527f1281ae77063edb1ef9b3a3671b00d306fe322c3ca1b34c1d4d81 SHA512 90440af3959a17388999f07a3b40f770c5511bceda6a39d4c56f867dc5ae8494e49cfb700eb79e31422ebfd1b1990f6d7912083c688963139446f1e43e9d08c8
+DIST ncurses-6.3-20211106.patch.gz 3995 BLAKE2B fbacfd6bfbf64b2935d47f648bd74c93136ea8d17b51e218b80a24695b52246ce8ec01704a0636692bae72815c8b93dec8573570dfd126b19645ec90926e818a SHA512 799819ed01967387fdca4755ab44401f0dc90306f6f771c894ce6702c929e2ff87f45d3e1c2e683cc32bb01553f3332c3a7591a00b7a4bdff93da25307379bdc
 DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105

diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
new file mode 100644
index 00000000000..21b6525370f
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -0,0 +1,355 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+	https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+	ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+	# Sometimes, after releases, there's no megapatch available yet.
+	#
+	# From upstream README at e.g. https://invisible-mirror.net/archives/ncurses/6.3/:
+	#
+	#	"At times (generally to mark a relatively stable point), I create a rollup
+	#	patch, which consists of all changes from the release through the current date."
+	#
+	# This array should contain a list of all the snapshots since the last
+	# release if there's no megapatch available yet.
+	PATCH_DATES=(
+		20211026
+		20211030
+		# Latest patch is just _pN = $(ver_cut 4)
+		$(ver_cut 4)
+	)
+
+	if [[ -z ${PATCH_DATES[@]} ]] ; then
+		SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2
+			https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2"
+	else
+		patch_date=
+		for patch_date in "${PATCH_DATES[@]}" ; do
+			SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+			SRC_URI+=" https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+		done
+		unset patch_date
+	fi
+
+	#SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+# Unkeyworded for testing; contains pkg-config fixes for e.g. cross and bootstrapping(?)
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+#	berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+	!<=sys-libs/ncurses-5.9-r4:5
+	!<sys-libs/slang-2.3.2_pre23
+	!<x11-terms/rxvt-unicode-9.06-r3
+	!<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+	"${FILESDIR}/${PN}-5.7-nongnu.patch"
+	"${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+	"${FILESDIR}/${PN}-6.0-pkg-config.patch"
+	"${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+	"${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+	if [[ "${PV}" == *_p* ]] ; then
+		#eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+		eapply "${WORKDIR}"/
+	fi
+	default
+}
+
+src_configure() {
+	unset TERMINFO #115036
+	tc-export_build_env BUILD_{CC,CPP}
+	BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+	# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+	# Order matters here -- we want unicode/thread versions to come last so that the
+	# binaries in /usr/bin support both wide and narrow.
+	# The naming is also important as we use these directly with filenames and when
+	# checking configure flags.
+	NCURSES_TARGETS=(
+		ncurses
+		ncursesw
+		ncursest
+		ncursestw
+	)
+
+	# When installing ncurses, we have to use a compatible version of tic.
+	# This comes up when cross-compiling, doing multilib builds, upgrading,
+	# or installing for the first time.  Build a local copy of tic whenever
+	# the host version isn't available. #249363 #557598
+	if ! has_version -b "~sys-libs/${P}:0" ; then
+		local lbuildflags="-static"
+
+		# some toolchains don't quite support static linking
+		local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+		case ${CHOST} in
+			*-darwin*)  dbuildflags=     ;;
+			*-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+		esac
+		echo "int main() {}" | \
+			$(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+			|| lbuildflags="${dbuildflags}"
+
+		# We can't re-use the multilib BUILD_DIR because we run outside of it.
+		BUILD_DIR="${WORKDIR}" \
+		CC=${BUILD_CC} \
+		CHOST=${CBUILD} \
+		CFLAGS=${BUILD_CFLAGS} \
+		CXXFLAGS=${BUILD_CXXFLAGS} \
+		CPPFLAGS=${BUILD_CPPFLAGS} \
+		LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+		do_configure cross --without-shared --with-normal --with-progs
+	fi
+	multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+	local t
+	for t in "${NCURSES_TARGETS[@]}" ; do
+		do_configure "${t}"
+	done
+}
+
+do_configure() {
+	local target=$1
+	shift
+
+	mkdir "${BUILD_DIR}/${target}" || die
+	cd "${BUILD_DIR}/${target}" || die
+
+	local conf=(
+		# We need the basic terminfo files in /etc, bug #37026.  We will
+		# add '--with-terminfo-dirs' and then populate /etc/terminfo in
+		# src_install() ...
+		--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+		# Disabled until #245417 is sorted out.
+		#$(use_with berkdb hashed-db)
+
+		# Enable installation of .pc files.
+		--enable-pc-files
+		# This path is used to control where the .pc files are installed.
+		--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+		# Now the rest of the various standard flags.
+		--with-shared
+		--without-hashed-db
+		$(use_with ada)
+		$(use_with cxx)
+		$(use_with cxx cxx-binding)
+		--with-cxx-shared
+		$(use_with debug)
+		$(use_with profile)
+		# The configure script uses ldd to parse the linked output which
+		# is flaky for cross-compiling/multilib/ldd versions/etc...
+		$(use_with gpm gpm libgpm.so.1)
+		# Required for building  on mingw-w64, and possibly other windows
+		# platforms, bug #639670
+		$(use_enable kernel_Winnt term-driver)
+		--disable-termcap
+		--enable-symlinks
+		--with-rcs-ids
+		--with-manpage-format=normal
+		--enable-const
+		--enable-colorfgbg
+		--enable-hard-tabs
+		--enable-echo
+		$(use_enable !ada warnings)
+		$(use_with debug assertions)
+		$(use_enable !debug leaks)
+		$(use_with debug expanded)
+		$(use_with !debug macros)
+		$(multilib_native_with progs)
+		$(use_with test tests)
+		$(use_with trace)
+		$(use_with tinfo termlib)
+		--disable-stripping
+		--disable-pkg-ldflags
+	)
+
+	if [[ ${target} == ncurses*w ]] ; then
+		conf+=( --enable-widec )
+	else
+		conf+=( --disable-widec )
+	fi
+	if [[ ${target} == ncursest* ]] ; then
+		conf+=( --with-{pthread,reentrant} )
+	else
+		conf+=( --without-{pthread,reentrant} )
+	fi
+	# Make sure each variant goes in a unique location.
+	if [[ ${target} == "ncurses" ]] ; then
+		# "ncurses" variant goes into "${EPREFIX}"/usr/include
+		# It is needed on Prefix because the configure script appends
+		# "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+		conf+=( --enable-overwrite )
+	else
+		conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+	fi
+	# See comments in src_configure.
+	if [[ ${target} != "cross" ]] ; then
+		local cross_path="${WORKDIR}/cross"
+		[[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+	fi
+
+	# Force bash until upstream rebuilds the configure script with a newer
+	# version of autotools. #545532
+	#CONFIG_SHELL=${EPREFIX}/bin/bash \
+	ECONF_SOURCE="${S}" \
+	econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+	# See comments in src_configure.
+	if ! has_version -b "~sys-libs/${P}:0" ; then
+		# We could possibly merge these two branches but opting to be
+		# conservative when merging some of the Prefix changes.
+
+		if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+			# We make 'tic$(x)' here, for Cygwin having x=".exe".
+			BUILD_DIR="${WORKDIR}" \
+				 do_compile cross -C progs all PROGS='tic$(x)'
+		else
+			BUILD_DIR="${WORKDIR}" \
+				 do_compile cross -C progs tic
+		fi
+	fi
+
+	multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+	local t
+	for t in "${NCURSES_TARGETS[@]}" ; do
+		do_compile "${t}"
+	done
+}
+
+do_compile() {
+	local target=$1
+	shift
+
+	cd "${BUILD_DIR}/${target}" || die
+
+	# A little hack to fix parallel builds ... they break when
+	# generating sources so if we generate the sources first (in
+	# non-parallel), we can then build the rest of the package
+	# in parallel.  This is not really a perf hit since the source
+	# generation is quite small.
+	emake -j1 sources
+	# For some reason, sources depends on pc-files which depends on
+	# compiled libraries which depends on sources which ...
+	# Manually delete the pc-files file so the install step will
+	# create the .pc files we want.
+	rm -f misc/pc-files || die
+	emake "$@"
+}
+
+multilib_src_install() {
+	local target
+	for target in "${NCURSES_TARGETS[@]}" ; do
+		emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+	done
+
+	# Move main libraries into /.
+	if multilib_is_native_abi ; then
+		gen_usr_ldscript -a \
+			"${NCURSES_TARGETS[@]}" \
+			$(usex tinfo 'tinfow tinfo' '')
+	fi
+	if ! tc-is-static-only ; then
+		# Provide a link for -lcurses.
+		ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+	fi
+	# don't delete '*.dll.a', needed for linking #631468
+	if ! use static-libs; then
+		find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+	fi
+
+	# Build fails to create this ...
+	# -FIXME-
+	# Ugly hackaround for riscv having two parts libdir (#689240)
+	# Replace this hack with an official solution once we have one...
+	# -FIXME-
+	dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+		/usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+#	if ! use berkdb ; then
+		# We need the basic terminfo files in /etc for embedded/recovery. #37026
+		einfo "Installing basic terminfo files in /etc..."
+		local terms=(
+			# Dumb/simple values that show up when using the in-kernel VT.
+			ansi console dumb linux
+			vt{52,100,102,200,220}
+			# [u]rxvt users used to be pretty common.  Probably should drop this
+			# since upstream is dead and people are moving away from it.
+			rxvt{,-unicode}{,-256color}
+			# xterm users are common, as is terminals re-using/spoofing it.
+			xterm xterm-{,256}color
+			# screen is common (and reused by tmux).
+			screen{,-256color}
+			screen.xterm-256color
+		)
+		local x
+		for x in "${terms[@]}"; do
+			local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+			local basedir=$(basename "$(dirname "${termfile}")")
+
+			if [[ -n ${termfile} ]] ; then
+				dodir "/etc/terminfo/${basedir}"
+				mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+				dosym "../../../../etc/terminfo/${basedir}/${x}" \
+					"/usr/share/terminfo/${basedir}/${x}"
+			fi
+		done
+#	fi
+
+	echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+	use minimal && rm -r "${ED}"/usr/share/terminfo*
+	# Because ncurses5-config --terminfo returns the directory we keep it
+	keepdir /usr/share/terminfo #245374
+
+	cd "${S}" || die
+	dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+	if use doc ; then
+		docinto html
+		dodoc -r doc/html/
+	fi
+}
+
+pkg_preinst() {
+	preserve_old_lib /$(get_libdir)/libncurses.so.5
+	preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+	preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+	preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}