[gentoo-commits] repo/gentoo:master commit in: sys-cluster/glusterfs/

["Sam James" <sam@gentoo.org>]

commit:     e68166f39e0c03b05b98cafc019b92b3e1a04807
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Jul 31 01:33:43 2021 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Jul 31 01:37:11 2021 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e68166f3

sys-cluster/glusterfs: consistently call tmpfiles_process in pkg_postinst

We weren't always calling tmpfiles_process in pkg_postinst,
nor we were always using the correct filename.

Signed-off-by: Sam James <sam <AT> gentoo.org>

 sys-cluster/glusterfs/glusterfs-7.9-r1.ebuild | 12 +++++++-----
 sys-cluster/glusterfs/glusterfs-8.3-r1.ebuild | 12 +++++++-----
 sys-cluster/glusterfs/glusterfs-8.4-r1.ebuild | 12 +++++++-----
 sys-cluster/glusterfs/glusterfs-8.5-r1.ebuild |  5 +++--
 sys-cluster/glusterfs/glusterfs-9.1-r1.ebuild | 12 +++++++-----
 sys-cluster/glusterfs/glusterfs-9.2-r1.ebuild |  4 ++--
 6 files changed, 33 insertions(+), 24 deletions(-)

diff --git a/sys-cluster/glusterfs/glusterfs-7.9-r1.ebuild b/sys-cluster/glusterfs/glusterfs-7.9-r1.ebuild
index c06064e3dd8..8fe9cb9d3d7 100644
--- a/sys-cluster/glusterfs/glusterfs-7.9-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-7.9-r1.ebuild
@@ -104,7 +104,7 @@ src_configure() {
 		$(use_enable xml xml-output) \
 		$(use libtirpc || echo --without-libtirpc) \
 		$(use ipv6 && echo --with-ipv6-default) \
-		--with-tmpfilesdir="${EPREFIX}"/etc/tmpfiles.d \
+		--with-tmpfilesdir="${EPREFIX}"/usr/lib/tmpfiles.d \
 		--localstatedir="${EPREFIX}"/var
 }
 
@@ -113,6 +113,10 @@ src_compile() {
 	use emacs && elisp-compile extras/glusterfs-mode.el
 }
 
+src_test() {
+	./run-tests.sh || die
+}
+
 src_install() {
 	default
 
@@ -171,11 +175,9 @@ src_install() {
 	python_optimize "${ED}"
 }
 
-src_test() {
-	./run-tests.sh || die
-}
-
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"

diff --git a/sys-cluster/glusterfs/glusterfs-8.3-r1.ebuild b/sys-cluster/glusterfs/glusterfs-8.3-r1.ebuild
index c6fc8ce35bc..79808b9e3ff 100644
--- a/sys-cluster/glusterfs/glusterfs-8.3-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-8.3-r1.ebuild
@@ -98,7 +98,7 @@ src_configure() {
 		$(use_enable xml xml-output) \
 		$(use libtirpc || echo --without-libtirpc) \
 		$(use ipv6 && echo --with-ipv6-default) \
-		--with-tmpfilesdir="${EPREFIX}"/etc/tmpfiles.d \
+		--with-tmpfilesdir="${EPREFIX}"/usr/lib/tmpfiles.d \
 		--localstatedir="${EPREFIX}"/var
 }
 
@@ -107,6 +107,10 @@ src_compile() {
 	use emacs && elisp-compile extras/glusterfs-mode.el
 }
 
+src_test() {
+	./run-tests.sh || die
+}
+
 src_install() {
 	default
 
@@ -158,11 +162,9 @@ src_install() {
 	python_optimize "${ED}"
 }
 
-src_test() {
-	./run-tests.sh || die
-}
-
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"

diff --git a/sys-cluster/glusterfs/glusterfs-8.4-r1.ebuild b/sys-cluster/glusterfs/glusterfs-8.4-r1.ebuild
index c6fc8ce35bc..79808b9e3ff 100644
--- a/sys-cluster/glusterfs/glusterfs-8.4-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-8.4-r1.ebuild
@@ -98,7 +98,7 @@ src_configure() {
 		$(use_enable xml xml-output) \
 		$(use libtirpc || echo --without-libtirpc) \
 		$(use ipv6 && echo --with-ipv6-default) \
-		--with-tmpfilesdir="${EPREFIX}"/etc/tmpfiles.d \
+		--with-tmpfilesdir="${EPREFIX}"/usr/lib/tmpfiles.d \
 		--localstatedir="${EPREFIX}"/var
 }
 
@@ -107,6 +107,10 @@ src_compile() {
 	use emacs && elisp-compile extras/glusterfs-mode.el
 }
 
+src_test() {
+	./run-tests.sh || die
+}
+
 src_install() {
 	default
 
@@ -158,11 +162,9 @@ src_install() {
 	python_optimize "${ED}"
 }
 
-src_test() {
-	./run-tests.sh || die
-}
-
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"

diff --git a/sys-cluster/glusterfs/glusterfs-8.5-r1.ebuild b/sys-cluster/glusterfs/glusterfs-8.5-r1.ebuild
index 147d9640734..18671f3fc19 100644
--- a/sys-cluster/glusterfs/glusterfs-8.5-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-8.5-r1.ebuild
@@ -163,6 +163,8 @@ src_install() {
 }
 
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"
@@ -184,9 +186,8 @@ pkg_postinst() {
 	elog "If you are upgrading from a previous version of ${PN}, please read:"
 	elog "  http://docs.gluster.org/en/latest/Upgrade-Guide/upgrade_to_$(ver_cut '1-2')/"
 
-	tmpfiles_process glusterfs.conf
-
 	use emacs && elisp-site-regen
+
 }
 
 pkg_postrm() {

diff --git a/sys-cluster/glusterfs/glusterfs-9.1-r1.ebuild b/sys-cluster/glusterfs/glusterfs-9.1-r1.ebuild
index 8f52fcdca64..4b3b440fa71 100644
--- a/sys-cluster/glusterfs/glusterfs-9.1-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-9.1-r1.ebuild
@@ -99,7 +99,7 @@ src_configure() {
 		$(use_enable xml xml-output) \
 		$(use libtirpc || echo --without-libtirpc) \
 		$(use ipv6 && echo --with-ipv6-default) \
-		--with-tmpfilesdir="${EPREFIX}"/etc/tmpfiles.d \
+		--with-tmpfilesdir="${EPREFIX}"/usr/lib/tmpfiles.d \
 		--localstatedir="${EPREFIX}"/var
 }
 
@@ -108,6 +108,10 @@ src_compile() {
 	use emacs && elisp-compile extras/glusterfs-mode.el
 }
 
+src_test() {
+	./run-tests.sh || die
+}
+
 src_install() {
 	default
 
@@ -159,11 +163,9 @@ src_install() {
 	python_optimize "${ED}"
 }
 
-src_test() {
-	./run-tests.sh || die
-}
-
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"

diff --git a/sys-cluster/glusterfs/glusterfs-9.2-r1.ebuild b/sys-cluster/glusterfs/glusterfs-9.2-r1.ebuild
index 0ce6675dcb7..8bc22e9cba2 100644
--- a/sys-cluster/glusterfs/glusterfs-9.2-r1.ebuild
+++ b/sys-cluster/glusterfs/glusterfs-9.2-r1.ebuild
@@ -164,6 +164,8 @@ src_install() {
 }
 
 pkg_postinst() {
+	tmpfiles_process gluster.conf
+
 	elog "Starting with ${PN}-3.1.0, you can use the glusterd daemon to configure your"
 	elog "volumes dynamically. To do so, simply use the gluster CLI after running:"
 	elog "  /etc/init.d/glusterd start"
@@ -185,8 +187,6 @@ pkg_postinst() {
 	elog "If you are upgrading from a previous version of ${PN}, please read:"
 	elog "  http://docs.gluster.org/en/latest/Upgrade-Guide/upgrade_to_$(ver_cut '1-2')/"
 
-	tmpfiles_process gluster.conf
-
 	use emacs && elisp-site-regen
 }