[gentoo-commits] repo/gentoo:master commit in: net-wireless/hostapd/

["Sam James" <sam@gentoo.org>]

commit:     b8784caf8f52ba3257e60ba0273a9ecfd224c073
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 10 14:41:11 2021 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Jan 10 14:42:32 2021 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b8784caf

net-wireless/hostapd: missing || dies

Package-Manager: Portage-3.0.12, Repoman-3.0.2
Signed-off-by: Sam James <sam <AT> gentoo.org>

 net-wireless/hostapd/hostapd-2.9-r3.ebuild | 143 +++++++++++++++--------------
 1 file changed, 73 insertions(+), 70 deletions(-)

diff --git a/net-wireless/hostapd/hostapd-2.9-r3.ebuild b/net-wireless/hostapd/hostapd-2.9-r3.ebuild
index a8d7912544a..61cac6a1e0c 100644
--- a/net-wireless/hostapd/hostapd-2.9-r3.ebuild
+++ b/net-wireless/hostapd/hostapd-2.9-r3.ebuild
@@ -1,7 +1,7 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
-EAPI="6"
+EAPI=7
 
 inherit toolchain-funcs systemd savedconfig
 
@@ -10,16 +10,18 @@ HOMEPAGE="http://w1.fi"
 EXTRAS_VER="2.7-r2"
 EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
 SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
+S="${S}/${PN}"
 
-if [[ $PV == 9999 ]]; then
+if [[ ${PV} == 9999 ]]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	if [[ $PV =~ ^.*_p[0-9]{8}$ ]]; then
+	if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
 		SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
 	else
 		SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
 	fi
+
 	# Never stabilize snapshot ebuilds please
 	KEYWORDS="amd64 arm arm64 ~mips ppc x86"
 fi
@@ -46,8 +48,6 @@ DEPEND="
 
 RDEPEND="${DEPEND}"
 
-S="${S}/${PN}"
-
 pkg_pretend() {
 	if use internal-tls; then
 		if use libressl; then
@@ -71,12 +71,14 @@ src_prepare() {
 	# i.e. anything outside ${S}/${PN}
 	pushd ../ >/dev/null || die
 	default
-	#CVE-2019-16275 bug #696032
+
+	# CVE-2019-16275 bug #696032
 	eapply "${FILESDIR}/hostapd-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch"
 	# CVE-2020-12695 bug #727542
 	eapply "${FILESDIR}/${P}-0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch"
 	eapply "${FILESDIR}/${P}-0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch"
 	eapply "${FILESDIR}/${P}-0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch"
+
 	popd >/dev/null || die
 
 	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
@@ -88,122 +90,122 @@ src_configure() {
 
 	restore_config "${CONFIG}"
 	if [[ -f "${CONFIG}" ]]; then
-		default_src_configure
+		default
 		return 0
 	fi
 
 	# toolchain setup
-	echo "CC = $(tc-getCC)" > ${CONFIG}
+	echo "CC = $(tc-getCC)" > ${CONFIG} || die
 
 	# EAP authentication methods
-	echo "CONFIG_EAP=y" >> ${CONFIG}
-	echo "CONFIG_ERP=y" >> ${CONFIG}
-	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
+	echo "CONFIG_EAP=y" >> ${CONFIG} || die
+	echo "CONFIG_ERP=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
 
 	if use suiteb; then
-		echo "CONFIG_SUITEB=y" >> ${CONFIG}
-		echo "CONFIG_SUITEB192=y" >> ${CONFIG}
+		echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
+		echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
 	fi
 
 	if use internal-tls && ! use libressl; then
-		echo "CONFIG_TLS=internal" >> ${CONFIG}
+		echo "CONFIG_TLS=internal" >> ${CONFIG} || die
 	else
 		# SSL authentication methods
-		echo "CONFIG_DPP=y" >> ${CONFIG}
-		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
-		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
-		echo "CONFIG_OWE=y" >> ${CONFIG}
-		echo "CONFIG_SAE=y" >> ${CONFIG}
-		echo "CONFIG_TLSV11=y" >> ${CONFIG}
-		echo "CONFIG_TLSV12=y" >> ${CONFIG}
+		echo "CONFIG_DPP=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
+		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
+		echo "CONFIG_OWE=y" >> ${CONFIG} || die
+		echo "CONFIG_SAE=y" >> ${CONFIG} || die
+		echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
+		echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
 	fi
 
 	if use wps; then
 		# Enable Wi-Fi Protected Setup
-		echo "CONFIG_WPS=y" >> ${CONFIG}
-		echo "CONFIG_WPS2=y" >> ${CONFIG}
-		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
-		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
+		echo "CONFIG_WPS=y" >> ${CONFIG} || die
+		echo "CONFIG_WPS2=y" >> ${CONFIG} || die
+		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} || die
+		echo "CONFIG_WPS_NFC=y" >> ${CONFIG} || die
 		einfo "Enabling Wi-Fi Protected Setup support"
 	fi
 
-	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
-	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
-	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
+	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_TNC=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_GTC=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_SIM=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_AKA=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_EKE=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_PAX=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_PSK=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} || die
+	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} || die
 
 	einfo "Enabling drivers: "
 
 	# drivers
-	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
+	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} || die
 	einfo "  HostAP driver enabled"
-	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
+	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} || die
 	einfo "  Wired driver enabled"
-	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
+	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} || die
 	einfo "  None driver enabled"
 
 	einfo "  nl80211 driver enabled"
-	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
+	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} || die
 
 	# epoll
-	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
+	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} || die
 
 	# misc
-	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
-	echo "CONFIG_PKCS12=y" >> ${CONFIG}
-	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
-	echo "CONFIG_IAPP=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
-	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
-	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
-	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
-	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
-	echo "CONFIG_HS20=y" >> ${CONFIG}
-	echo "CONFIG_WNM=y" >> ${CONFIG}
-	echo "CONFIG_FST=y" >> ${CONFIG}
-	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
-	echo "CONFIG_ACS=y" >> ${CONFIG}
+	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} || die
+	echo "CONFIG_PKCS12=y" >> ${CONFIG} || die
+	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} || die
+	echo "CONFIG_IAPP=y" >> ${CONFIG} || die
+	echo "CONFIG_IEEE80211R=y" >> ${CONFIG} || die
+	echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
+	echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
+	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
+	echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
+	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
+	echo "CONFIG_INTERWORKING=y" >> ${CONFIG} || die
+	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} || die
+	echo "CONFIG_HS20=y" >> ${CONFIG} || die
+	echo "CONFIG_WNM=y" >> ${CONFIG} || die
+	echo "CONFIG_FST=y" >> ${CONFIG} || die
+	echo "CONFIG_FST_TEST=y" >> ${CONFIG} || die
+	echo "CONFIG_ACS=y" >> ${CONFIG} || die
 
 	if use netlink; then
 		# Netlink support
-		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
+		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} || die
 	fi
 
 	if use ipv6; then
 		# IPv6 support
-		echo "CONFIG_IPV6=y" >> ${CONFIG}
+		echo "CONFIG_IPV6=y" >> ${CONFIG} || die
 	fi
 
 	if use sqlite; then
 		# Sqlite support
-		echo "CONFIG_SQLITE=y" >> ${CONFIG}
+		echo "CONFIG_SQLITE=y" >> ${CONFIG} || die
 	fi
 
 	# If we are using libnl 2.0 and above, enable support for it
 	# Removed for now, since the 3.2 version is broken, and we don't
 	# support it.
 	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
+		echo "CONFIG_LIBNL32=y" >> ${CONFIG} || die
 	fi
 
 	# TODO: Add support for BSD drivers
 
-	default_src_configure
+	default
 }
 
 src_compile() {
@@ -265,7 +267,8 @@ pkg_postinst() {
 	einfo "essid_wlan0=\"test\""
 	einfo "mode_wlan0=\"master\""
 	einfo
-	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
+
+	#if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
 	#	einfo "This package now compiles against the headers installed by"
 	#	einfo "the kernel source for the mac80211 driver. You should "
 	#	einfo "re-emerge ${PN} after upgrading your kernel source."